Products with ELD "UEI002"
Below you will find a list of products with the ELD "" obtained from our database, including their available manuals, documentation, and images.
Click the corresponding vendor name to obtain additional information on the manufactorer, as well as contact information for further troubleshooting.
United Eld
| Vendor | Device Name | Model Number | Approved Version |
|---|---|---|---|
| | United Eld | UE002 | 4.4.5 |
Data Transfer and Reporting Procedures
> Telematic (Web Service, Email)Malfunctions and Testing
There is a section in the uploaded manual that describes and highlights the data transfer mechanism with colors and visual cues. 1. Tap the hamburger menu icon on the top left corner, or swipe from the left side of your device to the right side and select “Inspection Module” 2. Tap “Begin Inspection” and hand your device to the officer or tap “Send Output File” to send the report via email or web services.Certification Statement
There is a section in the uploaded manual that describes and showcases Malfunctions with colors and visual cues. How does the driver know if United ELD is malfunctioning? The United ELD device has LED lights to simply indicate its status to the driver. DURING INSTALLATION NO LIGHTS Device Not Plugged into the truck's diagnostic port. BLUE SOLID (WORKING PROPERLY) The application is Connected and the Adapter is Receiving ECM data. BLUE BLINKING (MALFUNCTIONING) The Adapter is waiting for the application to connect. GREEN BLINKING (MALFUNCTIONING) The application is connected but the Adapter is waiting for the ECMs. Most likely this is because the key is off. DURING ELD OPERATION BLUE SOLID WITH MAGENTA FLASHES (WORKING PROPERLY) The application is Connected and the Adapter is Recording ELD data. The LEDs will flash Magenta each time record is recorded. GREEN SOLID WITH MAGENTA FLASHES (MALFUNCTIONING) The application is not connected and the Adapter is recording ELD data. The LEDs will flash Magenta each time a record is recorded. GREEN BLINKING (MALFUNCTIONING) The application is not connected and the Adapter is recording ELD data but waiting for ECM data. Most likely the key is off. WHAT DOES THE DRIVER NEED TO DO IF THE ELD IS MALFUNCTIONING? 1. Contact United ELD support immediately after discovering a malfunction at 888-228-4460 or [email protected] to troubleshoot the issue. 2. Provide written notice to your fleet management within 24 hours of malfunction discovery. 3. Keep a paper log for that day and until ELD is repaired or replaced. WHAT DOES THE FLEET NEED TO DO IF THE ELD IS MALFUNCTIONING? 1. A motor carrier must take action to correct the malfunction of the ELD within 8 days of discovery of the malfunction or a driver’s notification to the motor carrier, whichever occurs first. 2. Upon notification by the fleet manager, United ELD will send a new device. 3. If a motor carrier needs a time extension, they must notify the FMCSA Division Administrator for the State of the motor carrier’s principal place of business within five days after a driver notifies the motor carrier according to the guidelines set forth in § 395.34 (2). United ELD will monitor and report malfunction data based on section 4.6 ELD’s Self-Monitoring of Required Functions table 4: P - “Power compliance” malfunction E - “Engine synchronization compliance” malfunction T - “Timing compliance” malfunction L - “Positioning compliance” malfunction R - “Data recording compliance” malfunction S - “Data transfer compliance” malfunction O - “Other” ELD detected malfunction
User Manual: 
Unitet_ELD_Manual.pdf