Products with ELD "MCP050"
Below you will find a list of products with the ELD "" obtained from our database, including their available manuals, documentation, and images.
Click the corresponding vendor name to obtain additional information on the manufactorer, as well as contact information for further troubleshooting.
Omnitracs Mobile Computing Platform
| Vendor | Device Name | Model Number | Approved Version |
|---|---|---|---|
| | Omnitracs Mobile Computing Platform | 50 | CA1397R or Later |
Data Transfer and Reporting Procedures
Follow these steps to transmit HOS records via Web Services or Email. 1. Tap the Day Log tab. (A) 2. If you are still in “Inspector mode” tap on the Driver button (B). 3. Tap the ERODS button (C). 4. Select Web Services or Email on the left (D). 5. Enter a comment if requested then tap Send (E). 6. A confirmation screen will appear. 7. If the transfer is unsuccessful, the display is considered a compliant secondary record of duty statusMalfunctions and Testing
Malfunctions and Diagnostics If you receive any of the following errors or malfunctions on your ELD you are required to keep paper logs until the malfunction has been corrected. Omnitracs, LLC 717 N. Harwood Street, Suite 1300 Dallas, TX 75201 U.S.A January 2018 FMCSA Registration ID: xxxxxx ELD ID: MCP050 Copyright © 2017 Omnitracs, LLC. All rights reserved. Omnitracs is a trademark of Omnitracs, LLC. All other trademarks are the property of their respective owners. Omnitracs endeavors to ensure that the information in this document is correct and fairly stated, but Omnitracs is not liable for any errors or omissions. Published information may not be up to date, and it is important to confirm current status with Omnitracs. This technical data may be subject to U.S. and international export, re-export or transfer (export) laws. Diversion contrary to U.S. and international law is strictly prohibited. * Power – An ELD must be powered and functional within one minute of the vehicle’s engine receiving power and remain powered for as long as the vehicle’s engine stays powered. * Engine Synchronization – An ELD is required to establish a link to the engine ECM and monitor its connectivity to the engine ECM and its ability to retrieve the vehicle parameters. * Timing – The ELD must cross-check its compliance with the external UTC source and must record any timing compliance malfunction. * Positioning – An ELD must monitor the availability of position measurements meeting the listed accuracy requirements and track the distance and time from the last valid measurement point. Data Recording – An ELD must monitor its storage capacity and integrity and must detect a data recording compliance malfunction if it can no longer record or retain required events. * Data Transfer – An ELD must implement in-service monitoring functions to verify that the data transfer mechanism(s) are continuing to function properly * Other – Any other ELD detected malfunction such as Bluetooth, relay, etc.Certification Statement
Omnitracs MCP050 FMCSA Certifying Statement on Product Testing for ELD Regulation Compliance Omnitracs has distributed and supported AOBRDs in the marketplace since 1989 and has developed testing processes that would assess all areas of the compliance requirements for 49CFR 395.8 and 49CFR 395.15. We have a quality assurance process that follows the creation of story cards for each section of the ELD Mandate specifications. This QA process has been standard operating procedure for Omnitracs and has increased with the ELD mandate requirements. We have used the ELD Testing document issued by FMCSA as a reference to ensure that our testing parallels or exceeds the requirements. Additionally, tests have been created that evaluate fringe cases that are not included in the FMCSA document. Omnitracs employs automated script testing processes for testing of individual elements to ensure consistent and repeatable testing as well the ability to add fringe case scenarios to ensure that in each section of the ELD Mandate, compliance is achieved. We have modified our product through variance changes in the vehicle ECM, changes by OEM and SAE standards, and maintained compliance to ensure that we are continually able to supply information from the ECM. This has ensured that we comply with all the data capture and motion detection requirements specified in the ELD Mandate for the engine ECM. Our testing process includes testing in actual CMV class 6- 8 vehicles as well as using vehicle ECM simulators in testing labs. We additionally use GPS simulators to validate recovery and diagnostics for various situations that can occur in vehicles or environments when GPS may be compromised. With this and other testing processes we are able to test each requirement for diagnostics and malfunctions as required by the ELD Mandate specifications. Additionally, we have provided to Volpe an eRODS test file requested by FMCSA and that file has been accepted. We understand that the actual eRODS transfer process has not been finalized and it will require additional testing and some modifications once all information is available from FMCSA. Omnitracs information security program is based on NIST 800-53 Revision 4. We have ensured that the specified additional security requirements referenced in the regulation for PKI, FIPS, and other NIST specifications have been achieved for compliance to support eRODS transfer
User Manual: 
MCP50 Manual and Cab Card.pdf
Omnitracs Mobile Computing Platform - Self Revoked as of 1655302148
| Vendor | Device Name | Model Number | Approved Version |
|---|---|---|---|
| | Omnitracs Mobile Computing Platform | 50 | CA1399R or Later |
Data Transfer and Reporting Procedures
>Malfunctions and Testing
Follow these steps to transmit HOS records via Web Services or Email. 1. Tap the Day Log tab. (A) 2. If you are still in “Inspector mode” tap on the Driver button (B). 3. Tap the ERODS button (C). 4. Select Web Services or Email on the left (D). 5. Enter a comment if requested then tap Send (E). 6. A confirmation screen will appear. 7. If the transfer is unsuccessful, the display is considered a compliant secondary record of duty statusCertification Statement
Malfunctions and Diagnostics If you receive any of the following errors or malfunctions on your ELD you are required to keep paper logs until the malfunction has been corrected. Omnitracs, LLC 717 N. Harwood Street, Suite 1300 Dallas, TX 75201 U.S.A January 2018 FMCSA Registration ID: xxxxxx ELD ID: MCP050 Copyright © 2017 Omnitracs, LLC. All rights reserved. Omnitracs is a trademark of Omnitracs, LLC. All other trademarks are the property of their respective owners. Omnitracs endeavors to ensure that the information in this document is correct and fairly stated, but Omnitracs is not liable for any errors or omissions. Published information may not be up to date, and it is important to confirm current status with Omnitracs. This technical data may be subject to U.S. and international export, re-export or transfer (export) laws. Diversion contrary to U.S. and international law is strictly prohibited. * Power – An ELD must be powered and functional within one minute of the vehicle’s engine receiving power and remain powered for as long as the vehicle’s engine stays powered. * Engine Synchronization – An ELD is required to establish a link to the engine ECM and monitor its connectivity to the engine ECM and its ability to retrieve the vehicle parameters. * Timing – The ELD must cross-check its compliance with the external UTC source and must record any timing compliance malfunction. * Positioning – An ELD must monitor the availability of position measurements meeting the listed accuracy requirements and track the distance and time from the last valid measurement point. Data Recording – An ELD must monitor its storage capacity and integrity and must detect a data recording compliance malfunction if it can no longer record or retain required events. * Data Transfer – An ELD must implement in-service monitoring functions to verify that the data transfer mechanism(s) are continuing to function properly * Other – Any other ELD detected malfunction such as Bluetooth, relay, etc.
User Manual: MCP50 Manual and Cab Card.pdf