User manual for "FIRST ELD V2.0"
Below you will find the vendor-provided user manual for the ELD product "FIRST ELD V2.0".
For vendor contact details and additional devices from the same company, see their page
FIRST ELD LLC.
Manual text preview
User Manual for ELD +1 (645) 202-0550 [email protected] How to install ELD device 1 Ensure that your vehicles engine is turned off. If its currently running, please shut it down and turn the key to the Off position before proceeding to connect the ELD device 2 Locate the diagnostic port within your vehicles cabin. This port is typically found in one of the following locations: Under the left side of the dashboa Beneath the steering whee Near the driver's sea Underneath the driver's seat 3 Connect the ELD plug to the diagnostic port of the vehicle. Rotate the locking mechanism until it securely locks into place. Verify that the ELD is properly connected 4 Once the device is plugged in, it will begin synchronizing with the engine control module (ECM) and the nd the application on the tablet 6 Retrieve the tablet provided by the fleet and power it on. The tablet should automatically launch the application upon startup Connecting port +1 (645) 202-0550 [email protected] Connection guide 2 1 Sign in to the application Check the connection status If you dont have an account, please contact your carrier. If youve forgotten your password, you can reset it by clicking Forgot password? or contacting your carrier If the ELD is successfully connected to the vehicle, a green Bluetooth icon will appear in the top left corner of the screen. If the connection is not established, the icon will remain red +1 (645) 202-0550 [email protected] 3 4 1 2 Connect Truck Connection is established Select the desired truck from the lis If the ELD is successfully connected to Click on it and select the device you the vehicle, a green Bluetooth icon will want to connect it to appear in the top left corner of the screen. And you able to start driving or changing a status +1 (645) 202-0550 [email protected] Using on the road 2 1 After connecting, your driving time will be automatically logged When your vehicle begins moving and reaches a speed of at least 5 mph, your duty status is automatically set to Driving. If the vehicle speed drops below 5 mph, your duty status changes to On Duty. +1 (645) 202-0550 [email protected] Select a status from the main window based on your current situation Choose between Off Duty, Sleep, or On Duty depending on your circumstances. 3 Complete the location field And add any remarks, such as Pre-trip inspection or Loading. +1 (645) 202-0550 [email protected] How to Change Trailer/Shipping docs 2 1 1 2 Tap Trailer/Shipping In the home screen, tap the red highlighted section labeled Trailer / Shipping Docs to enter or update trailer and shipping document information. Enter Trailer and Shipping Docs 3 Enter the Trailer number(s) in the first field Enter the Shipping Document number(s) in the second field, also separated by commas. Save Tap the blue "Save" button to apply the changes. +1 (645) 202-0550 [email protected] Enable split Sleeper Provision 1 1 Enable Split Sleeper Provision To activate Split Sleeper rules for your hours of service Locate the SPLIT SB PROVISION switch on the home tab Toggle the switch on (it turns blue) to enable the provision. +1 (645) 202-0550 [email protected] How to Insert/Edit Logs 2 1 2 3 1 Home Logbook Inspection More Open the Logbook Tap Logbook in the bottom navigation bar. Then select the log date you want to view or edit by tapping the log time chart. Tap the log time chart Tap to the date you want view the logs. +1 (645) 202-0550 [email protected] Modify the Log Entry Tap Insert status or locate the event you want to edit, then tap the pencil icon next to it. 3 Modify the Log Entry Set the Start Time and End Time for the new or updated duty status Select the correct Duty Status: OFF, SB (Sleeper Berth), or ON Add a brief Note describing the reason for the change. 3 4 Tap Save Changes to apply the update. Note: Per ELD mandate, Drive time cannot be edited if recorded automatically by the system. 6 +1 (645) 202-0550 [email protected] How to View Violations 2 1 1 View from the Home Screen On the Home screen, if there's a red "Attention" notification banner, tap View to open the important messages This will take you to the Violations page if there are any issues with your logs. +1 (645) 202-0550 [email protected] Review Violations List On the Violations page, youll see a list of all recorded violations by date (e.g., missed 30-minute break, exceeded driving limit, etc.). 3 2 1 Home Logbook Inspection More View Violations from Logbook Tap Logbook in the bottom navigation bar Select the log date with violations If violations occurred that day, they will be listed under the log time chart (e.g., "3 violations"). +1 (645) 202-0550 [email protected] Inspection 2 1 1 2 Choose inspection tab Star tinspection or send logs Click on the Inspections icon in the main Initiate the inspection by tapping menu of the application. Start inspection To Email or Web upload logs to an officer, tap Send Logs +1 (645) 202-0550 [email protected] How to Transfer Logs 2 1 2 3 1 4 Click Logbook in the lower tapbar, select the logbook that you want to sign Enter comment Type the comment provided by the officer Select transfer type Select Email or Web, instructed by officer Send Press Send to transfer logs. +1 (645) 202-0550 [email protected] Malfunctions / Diagnostics 2 1 1 2 Malfunctions Access Diagnostics From the Home screen, tap the red Malfunctions & Data Diagnostics alert banner if visible. Review Diagnostic Issues In the Diagnostics screen, review any active issues such as Timing compliance malfunctio Engine sync compliance malfunctio Tap on each item to view full details. +1 (645) 202-0550 [email protected] 3 Malfunctions Read t Description & Actions The malfunction screen provides a detailed description of the issue Follow the recommended Actions +1 (645) 202-0550 [email protected]