User manual for "ZIGZAG ELD"
Below you will find the vendor provided user manual for the ELD product "ZIGZAG ELD".
For contact information and additional devices produced by the same vendor see their page
ZIGZAG SOLUTIONS LLC.
Diaz Lopez Alejandr Vehicle Unit: 1234 YM USER MANUAL ZigZag ELD ZIGZAG ELD ensures FMCSA compliance and delivers superior safety and productivity for any fleet 00:34 On Duty PC Sleeper Hours Remaining 07:15 Break OFF Driving 10:20 Driving Time Rest 07:00 60:00 Shift zigzageld.com Oct 4, Sunday Cycle table of contents Table of Contents zigzageld.com 02 Install the ap Connectio Recording drive tim Changing statu DOT inspectio LEDs guide USER MANUAL install the app 03 Downloading the Driver App Please ensure that a Vehicle Gateway is installed in your vehicle before proceeding. Refer to the Vehicle Gateway Manual for further instructions. ZIGZAG ELD Download the ZIGZAG Driver App from the Google Play Store (for Android) or the App Store (for IOS). ZIGZAG ELD 04 connection 1. Log in 2. Select vehicle 3. Connect to ELD Open ZIGZAG app and enter your Choose your track from the list of Press Scan button and connect to username and password vehicles your pt-30 device drive time Recording drive time The ELD considers a vehicle in motion when it exceeds 5 mph. When your vehicle is moving, your duty status automatically updates to DRIVING. 05 Monday 23 September, 2024 2 : 54 : 49 AM 00:40:21 When your vehicle stops, after 15 seconds button Change status will become active, allowing you to manually change your duty status. If the vehicle remains stationary for 1 minute, a message will appear with a 60-second timer, prompting you to choose whether to stay in DRIVING or switch to ON DUTY. If no action is taken by the end of the timer, the app will automatically switch your status to ON DUTY. If the vehicle starts moving again after this change, a new DRIVING status will be initiated. 10:20 Change status Driving 07:15 Break 07:00 Shift 00:59 60:00 Cycle Finished drive mode? Change the status below Sleeper Berth On duty Change status user manual Off duty Cancel Change status statuses Changing status You can change your duty status on homepage. Select a status from the four main statuses and it will become active. Active status will be on top of the others. When you choose tag YM or PC a message will appear with confirming changing the status. Yard Moves Press the tag YM to change On Duty status to Yard Moves. Personal Conveyance Press the tag PC to change Off Duty status to Personal Conveyance. 06 inspection 07 DOT Inspection Open Inspection Page Inspection Preview Transfer Logs Tap the Inspection menu item on the navigation at the bottom of the screen You can preview the inspection right on this page Press the button Transfer in order to transfer logs through Web or by E-mail 08 ledS LEDs guide The PT30 device is equipped with three main functional components GPS receive CAN transceive Low-power Bluetooth transceiver PT30 Device LED Indicators: Gray The device is not connected Green The device is connected, and the truck is running Blinking Green The device is connected, but the truck is not running Orange Device has detected a GPS signal Flashing Red The device is searching for a GPS signal Blinking Green and Orange Green and orange lights means everythings working right