User manual for "Zenith ELD (iOS)"

Website:

zenitheld.com
Contact e-mail:

[email protected]
Contact Phone Number:

+1 (737) 277 99 93

iOS User Guide

Introduction

Table of Contents

2


Log in/Log out

3


Home Menu

4


Connecting to the Truck


5


Switching of HOS Statuses

6


Personal Use and Yard Move


7


Logbook Menu


8


Team Driving

9


Additional Menu

10


Rules Menu

11


Fuel Receipts & IFTA


12


Settings


13


DVIR

14


DOT Inspection

15


Malfunctions and Data Inconsistencies


16


Malfunctions


17


Data Diagnostic Events



18


Introduction
Rely on the Zenith app to elevate the quality of your work!


To address customer needs, our team has developed the
Zenith application, a versatile mobile e-log designed to
enhance your work efficiency. 


When used with the PT30 ELD, the app displays engine
diagnostics, driver status changes, GPS tracking, and more
to create a safer and more productive work environment. 


It also enables drivers to log their Hours of Service (HOS),
complete DVIR reports, pass DOT checks, and share data
with safety officers for FMCSA compliance at an affordable
cost.

2

Log In \ Log Out

The Zenith application can be found in the Apple App Store on your iOS device. Tap the
Install

button

and

wait

for

the

app

to

download.

Then,

make

sure

to

accept

the

permissions the application requests for the correct work.



To use the Zenith app, you'll need to register a new account or sign in with your User
Login and Password if you already have an account with us. For your convenience, you can
also use Face ID/Touch ID for quick and secure access.



Your User Login and User Password are unique to you and created during registration on
our website. Please contact your Motor Carrier or Fleet Manager if you need help with
your login information.



When logging out of the Zenith application, ensure that the Upload Queue in the Settings
menu is empty. If not, check your internet connection and wait for all data to be transferred
before logging out.



Remember, if you want to use the application on a different device, it's crucial to log out of
the app on your current device. Logging into two different devices simultaneously can lead
to data loss, so please log out before switching devices.

3

Home Menu
In the Zenith application, you will see the main Hours of Service screen with the
following items:

Additional Menu icon
Truck icon shows track to PT30
connection
Malfunctions and data
inconsistencies icon shows if there are
any issues with a unit or ELD
Flag icon shows the rules of which
country you are following at the
moment.


Name icon shows the name of
the driver whose working hours
are counting at the moment.
Notifications
Status switcher.
HOS counter
HOS menu
Log menu
Rules men
DOT Inspection menu.

4

Connecting to the Truck
Please ensure your ELD device is correctly plugged into your truck, as explained in the
"Hardware Manual," before you connect your Zenith Application.


Once the ELD Device is connected correctly, you will need to turn on Bluetooth, open the
app, and tap on the Truck icon on the Home Screen. Using the app, all nearby trucks will
be scanned for ELD presence, and a list will be generated. You can set up the connection
with one tap by selecting your vehicle and ELD by serial number.


The Green Truck
icon at the top of the app screen indicates that the system is in ELD
mode and the truck is connected. The Red Truck
icon indicates that a connection was
lost and needs to be re-established.

5

Switching of HOS Statuses
You can change your statuses during a shift using the Status Switch interface. Driver
statuses include
Driving,
On Duty,
Off Duty
Sleeping Berth
Border Crossing
Yard Move (when your current status is On Duty),
Personal Use (when your current status is Off Duty).


After a vehicle starts moving, it will automatically record the Driving status within 1-5
seconds. It is essential to wait for up to 10 seconds after stopping before turning off the
engine. Once the ELD device recognizes the end of the Driving event and the Status
Switch interface becomes active again, you can turn off the engine.


If you turn off the engine before the ELD device recognizes the end of the Driving event,
the ELD device may get stuck in the Driving status, which can corrupt your log
recordings. If this happens, turn on the engine again, wait for the Driving event to end,
and change the status accordingly.


Manually added events like Personal Use and Yard Move can be entered by drivers
along with comments, shipping documents, and trailers. Please note that you should enter
the odometer data for manually added events.

6

Personal Use \ Yard Move
To switch to Personal Use or Yard Move statuses:

1. Select Off Duty for Personal Use or On Duty for
Yard Move in the Status Switch interface
Add a comment in the provided field to indicate
the status change.
Tap Clear, add a comment, and tap Save to
finalize the status change.


7

Logbook Menu
To access the Log menu containing all the details about a driver, vehicle, and
carrier, tap the Log menu on the bottom menu line. On this page, the Log graph
visually represent a driver's status switches and hours of service during a shift. 


You can switch between dates by clicking the respective date. 





To add a missing event to your logs, tap Insert Event. You can edit existing events
in your logs using the Pencil button. 


FMCSA regulations allow for both editing and adding options. These options
should not be used daily; they should only be used when data is entered
incorrectly or by mistake.

8

Team Driving
Team drivers can conveniently log their working hours and duty statuses using the
Zenith app. Each driver using the same vehicle must be logged into the same app
simultaneously on the same device, ensuring efficient coordination. 


Please note that using more than one device simultaneously (for both single and
team drivers) is prohibited, as this can result in unavoidable data loss.


As 

Read the full extracted text