User manual for "ELD88 LLC"
Below you will find the vendor provided user manual for the ELD product "ELD88 LLC".
For contact information and additional devices produced by the same vendor see their page
ELD 88 LLC.
ELD 88 USER MANUAL INSTALL & CONNECT ELD ELD Device 9-Pin Port 6-Pin Port OBDII 1 LOCATE ECM (DIAGNOSTIC) PORT Locate ECM (diagnostic) port inside of your vehicle. Look for 9-pin or 6-pin circular ports in heavy duty vehicles. Look for OBDII port in light/medium duty vehicles 2 install eld Simply plug the provided cable into a vehicle ECM (diagnostic) and attach the other end to the ELD device. The dual fastener is provided for dash mounting. 3 log into eld 88 Log in to ELD 88 App on your tablet/smartphone with a username and password created during a sign up process or provided by a fleet manager. 4 connect eld Select a vehicle from a list of available vehicles and your device will attempt to connect to ELD via Bluetooth. Active Bluetooth indicator means you are ready to start using ELD. driving with eld Once ELD connected, your driving time will be captured automatically. Once your vehicle is moving at 5 mph or more, your duty status is switched to Driving. Your logs and others features are not available while in Driving mode due to safety reasons. Once your vehicle is stopped, you may change your duty status by tapping on the status circle. The app will remind you to make a selection in 5 minutes. If no selection is made, your duty status will be switched to On Duty. ON duty status Set duty status with just two-clicks. Status is updated automatically when driving starts or stops, Easy-to-use interface allows drivers to spend less time doing paperwork and more timedriving. ELD simplifies training and prevents log errors. current status Current duty status is always displayed on Status page inside of status circle along with available or reset hours. change status Tap the status circle, select your current status, add a note if necessary (i.e. pretrip inspection) and press Update button. personal/yard move Personal Use Off-duty and Yard Move On-Duty statuses must be configured and allowed by a fleet manager. logs todays log Tap on TODAYS log to view & manage your current log logs history View past logs & violations if any. Tap on a log you would like to view or edit. graph grid Similar to paper logs, view your hours or service on the graph grid. statuses/events Tap on a specific status in the events section to view location and notes. edit/insert status Press on Pencil to edit or + to insert a past duty status. certify log Tap Certify and sign your log when your shift ends. fleet administration current status View currents statuses and locations of your drivers. Click on a driver to see details. real-time hours View real-time hours to avoid violations and regulatory fines. violations Monitor in real time and mitigate compliance risks. logbook details view logs View all current and past logs up to six months. filter Filter by date or driver. violations Monitor violations in real time.