Products with ELD "axe018"
Below you will find a list of products with the ELD "Axe018" obtained from our database, including their available manuals, documentation, and images.
Click the corresponding vendor name to obtain additional information on the manufacturer, as well as contact information for further troubleshooting.
!1Axle Bottlecap - Self Revoked as of 1576227166
| Vendor | Device Name | Model Number | Approved Version |
|---|---|---|---|
| | !1Axle Bottlecap | Axle2018 | 6.0 and above |
Data Transfer and Reporting Procedures
>Malfunctions and Testing
We are using web services data transfer and email data transfer. From the main screen of the ELD driver will press the green button with the word "Inspection" then proceed to press either Web Services or Email to send the logs in question to the DOT officer. Driver will also be prompted to place a note with their logs if required by the DOT officer.Certification Statement
Malfunction Code: P Power data malfunction: An ELD must monitor the data it receives from the engine ECM or alternative sources, and data record history to identify instances when it might not have complied with the power requirements. User should check Axle ELD connection to the ECM port in their truck and make sure it is plugged in securely and is flashing a green light. When the problem is resolved the malfunction will be cleared. Malfunction Code: E Engine synchronization compliance malfunction: An ELD must set an engine synchronization compliance malfunction, if connectivity to any of the required data sources is lost for more than 30 minutes during a 24-hour period aggregated across all driver profiles. User should check to make sure the Axle ELD is plugged in properly and flashing green. If the light on the ELD is flashing white or red please remove the ELD and plug it back in. Doing so should reset it and clear up the synchronization issue When the problem is resolved the malfunction will be cleared. Malfunction Code: Timing compliance malfunction: The ELD must periodically cross-check its time with an external UTC source, and must record a timing compliance malfunction when it can no longer meet the underlying timing requirement of less than 10 minutes’ time deviation. User should make sure the ELD is plugged in properly and flashing a green light. User should also make sure that their mobile device is set to acquire time automatically. When the problem is resolved the malfunction will be cleared. Malfunction Code: L Positioning Compliance malfunction: An ELD must monitor elapsed time during periods when the ELD fails to acquire a valid position measurement within five miles of the CMV’s movement. When such elapsed time exceeds a cumulative 60 minutes over a 24-hour period, the ELD must set and record a positioning compliance malfunction. This could be caused by lose of GPS signal either temporarily or locally. If the device is plugged in properly and flashing green, but you are not receiving the GPS location, we may need to send you a new Axle ELD device When the problem is resolved the malfunction will be cleared. Malfunction Code: R R Data recording compliance malfunction: An ELD must monitor its storage capacity and integrity and must detect a data recording compliance malfunction if it can no longer record or retain required events, or retrieve recorded logs that are not otherwise cataloged remotely by the motor carrier If you receive this malfunction please report to your company as soon as possible so they can report to the Axle support desk. Malfunction Code: S Data transfer compliance malfunction: After an ELD records a data transfer data diagnostic event, the ELD must increase the frequency of the monitoring function to check at least once every 24-hour period. If the ELD stays in the unconfirmed data transfer mode following the next three consecutive monitoring checks, the ELD must detect a data transfer compliance malfunction. User should make sure that their mobile device has internet connection and then again attempt to transfer the data. This should clear the malfunction. If you have internet and are still facing this issue. Please have your company contact support. Malfunction Code: O Other ELD identified malfunction: The other ELD identified malfunction is not supported. ELD you have connected is not supported by the Axle system. Please contact support Diagnostic Code 1 Power data diagnostic: An ELD must monitor the data it receives from the engine ECM and data record history to identify instances when it may not have complied with the power requirements. Likely an install issue, User should check Axle ELD connection to the ECM port in their truck and make sure it is plugged in securely and is flashing a green light. When the problem is resolved the diagnostics event will be cleared. Diagnostic Code 2 Engine synchronization diagnostic: An ELD is required to establish a link to the engine ECM, and must record an engine synchronization data diagnostics event, when it no longer can acquire values for the ELD parameters required for records within five seconds. User should check to make sure the Axle ELD is plugged in properly and flashing green. If the light on the ELD is flashing white or red please remove the ELD and plug it back in. Doing so should reset it and clear up the synchronization issue When the problem is resolved the diagnostic event will be cleared. Diagnostic code 3: Missing required data elements data diagnostic: An ELD must monitor the completeness of the ELD event record information in relation to the required data elements for each event type, and must record a missing data element and data diagnostics event for the driver, if any required field is missing at the time of recording. When there is a loss of GPS connection during an event, the user should review their logs where they will be prompted to manually enter the data missing. Upon completion the diagnostic event will be cleared. Diagnostic code 4: 4 Data transfer data diagnostic: An ELD must implement in-service monitoring functions to verify that the data transfer mechanism(s) are continuing to function properly. An ELD must verify this functionality at least once every seven days User should make sure their internet connection is turned on and working properly. If you internet is on properly, please contact support. Diagnostic code 5: Unidentified driving records data diagnostic: If more than 30 minutes of driving in a 24-hour period shows unidentified driver on the ELD, the ELD must detect and record an unidentified driving record data diagnostic event, and the data diagnostic indicator must be turned on for all drivers logged in to that ELD for the current 24-hour period and the following seven days. User should make sure all unassigned logs are claimed when they log into their truck each day if applicable. If all logs are assigned and you are still facing this issue contact support. Diagnostic event 6: “Other” ELD identified diagnostic: The other ELD identified is not supported. Please contact support.
User Manual: 
Axle ELD Manual (1).pdf