Products with ELD "TREND1"

Below you will find a list of products with the ELD "" obtained from our database, including their available manuals, documentation, and images.

Click the corresponding vendor name to obtain additional information on the manufactorer, as well as contact information for further troubleshooting.

Trendy ELD (Android)

Vendor	Device Name	Model Number	Approved Version
Trendy ELD	Trendy ELD (Android)	PT30	1.0.01 or higher

Data Transfer and Reporting Procedures
> Telematic (Web Service, Email)
Malfunctions and Testing
FMCSA reports is a page used for certifying your data, sending it to the Inspector, and tracking your main information. You may use the tab to see the following options: certification, unidentified events list, and start inspection. Once you click on Start Inspections, you will see the option of transferring data to Roadside Inspector in three ways: transfer data to FMCSA web services, send email to FMCSA or send a personal email to the DOT inspector.
Certification Statement
As per the FMCSA requirements, the ELD Provider should detect and collect any malfunctions occurring during the use of their device. There is M/D icon on the main screen of the application. Normally, M/D icon is green but once the malfunction is detected, 'M' on the M/D icon becomes red. Also, in case a data diagnostic event has been recognized, 'D' from M/D icon changes to red. Once you click on the M/D icon, you will able to see the the exact malfunction appeared. Here is the list of the all required malfunctions' types we detected: position malfunction, engine synchronization malfunction, data recording malfunction, power compliance malfunction, data transfer malfunction and timing malfunction.

Vendor	Device Name	Model Number	Approved Version
Trendy ELD	Trendy ELD (Android)	PT30	1.01.01

Data Transfer and Reporting Procedures
> Telematic (Web Service, Email)
Malfunctions and Testing
FMCSA reports is a page used for certifying your data, sending it to the Inspector, and tracking your main information. You may use the tab to see the following options: certification, unidentified events list, and start inspection. Once you click on Start Inspections, you will see the option of transferring data to Roadside Inspector in three ways: transfer data to FMCSA web services, send email to FMCSA or send a personal email to the DOT inspector.
Certification Statement
As per the FMCSA requirements, the ELD Provider should detect and collect any malfunctions occurring during the use of their device. There is M/D icon on the main screen of the application. Normally, M/D icon is green but once the malfunction is detected, 'M' on the M/D icon becomes red. Also, in case a data diagnostic event has been recognized, 'D' from M/D icon changes to red. Once you click on the M/D icon, you will able to see the the exact malfunction appeared. Here is the list of the all required malfunctions' types we detected: position malfunction, engine synchronization malfunction, data recording malfunction, power compliance malfunction, data transfer malfunction and timing malfunction.

Vendor	Device Name	Model Number	Approved Version
Trendy ELD	Trendy ELD (iOS)	PT30	1.01.01

Data Transfer and Reporting Procedures
> Telematic (Web Service, Email)
Malfunctions and Testing
FMCSA reports is a page used for certifying your data, sending it to the Inspector, and tracking your main information. You may use the tab to see the following options: certification, unidentified events list, and start inspection. Once you click on Start Inspections, you will see the option of transferring data to Roadside Inspector in three ways: transfer data to FMCSA web services, send email to FMCSA or send a personal email to the DOT inspector.
Certification Statement
As per the FMCSA requirements, the ELD Provider should detect and collect any malfunctions occurring during the use of their device. There is M/D icon on the main screen of the application. Normally, M/D icon is green but once the malfunction is detected, 'M' on the M/D icon becomes red. Also, in case a data diagnostic event has been recognized, 'D' from M/D icon changes to red. Once you click on the M/D icon, you will able to see the the exact malfunction appeared. Here is the list of the all required malfunctions' types we detected: position malfunction, engine synchronization malfunction, data recording malfunction, power compliance malfunction, data transfer malfunction and timing malfunction.

Vendor	Device Name	Model Number	Approved Version
Trendy ELD	Trendy ELD (iOS)	PT30	1.01.01 or higher

Data Transfer and Reporting Procedures
> Telematic (Web Service, Email)
Malfunctions and Testing
FMCSA reports is a page used for certifying your data, sending it to the Inspector, and tracking your main information. You may use the tab to see the following options: certification, unidentified events list, and start inspection. Once you click on Start Inspections, you will see the option of transferring data to Roadside Inspector in three ways: transfer data to FMCSA web services, send email to FMCSA or send a personal email to the DOT inspector.
Certification Statement
As per the FMCSA requirements, the ELD Provider should detect and collect any malfunctions occurring during the use of their device. There is M/D icon on the main screen of the application. Normally, M/D icon is green but once the malfunction is detected, 'M' on the M/D icon becomes red. Also, in case a data diagnostic event has been recognized, 'D' from M/D icon changes to red. Once you click on the M/D icon, you will able to see the the exact malfunction appeared. Here is the list of the all required malfunctions' types we detected: position malfunction, engine synchronization malfunction, data recording malfunction, power compliance malfunction, data transfer malfunction and timing malfunction.