Products with ELD "MCX101"

Below you will find a list of products with the ELD "" obtained from our database, including their available manuals, documentation, and images.

Click the corresponding vendor name to obtain additional information on the manufactorer, as well as contact information for further troubleshooting.

Contractors E Logs - MCX101

Vendor	Device Name	Model Number	Approved Version
EquipmentShare	Contractors E Logs - MCX101	MCX101-A	3.3.0

Data Transfer and Reporting Procedures
>
Malfunctions and Testing
The certified method of transferring data is via email and wireless web services. A driver will select “Inspection Mode” from the menu. There will be a button that says “Send Logs”. Select “Send Logs” and enter the email that the data will be transferred to. A driver may also send data directly to the FMCSA by tapping the button that reads "Send ELD Output File". If an internet connection cannot be established the driver can select “Begin Inspection” and pass the tablet to the safety official who can then view the current and last 7 days logs. Supported Data Transfer Methods: Email and Web Service
Certification Statement
1. POWER: There is a power issue with the hardware. It is possible the device is not connected. 2. ENGINE SYNCHRONIZATION: The mobile device has lost connectivity to the 3030 vehicle device for over 30 minutes. 3. TIMING: There is a discrepancy in timing between the devices and the vehicle. 4. POSITIONING: The GPS connection has been lost for 60 minutes or more. 5. DATA RECORDING: The device can no longer record or retain required events or retrieve recorded logs that are not kept remotely by the motor carrier. 6. DATA TRANSFER: The operation of the data transfer mechanism(s) is not confirmed. The device has remained in an unconfirmed data transfer mode for three consecutive monitoring checks.

Vendor	Device Name	Model Number	Approved Version
EquipmentShare	Contractors E Logs - MCX101	MCX101-A	4.3.13

Data Transfer and Reporting Procedures
> Telematic (Web Service, Email)
Malfunctions and Testing
The certified method of transferring data is via email and wireless web services. A driver will select “Inspection Mode” from the menu. There will be a button that says “Send Logs”. Select “Send Logs” and enter the email that the data will be transferred to. A driver may also send data directly to the FMCSA by tapping the button that reads "Send ELD Output File". If an internet connection cannot be established the driver can select “Begin Inspection” and pass the tablet to the safety official who can then view the current and last 7 days logs. Supported Data Transfer Methods: Email and Web Service
Certification Statement
1. POWER: There is a power issue with the hardware. It is possible the device is not connected. 2. ENGINE SYNCHRONIZATION: The mobile device has lost connectivity to the MCX101 vehicle device for over 30 minutes. 3. TIMING: There is a discrepancy in timing between the devices and the vehicle. 4. POSITIONING: The GPS connection has been lost for 60 minutes or more. 5. DATA RECORDING: The device can no longer record or retain required events or retrieve recorded logs that are not kept remotely by the motor carrier. 6. DATA TRANSFER: The operation of the data transfer mechanism(s) is not confirmed. The device has remained in an unconfirmed data transfer mode for three consecutive monitoring checks.