User manual for "NEW ELD WORLD 1.3"
Below you will find the vendor provided user manual for the ELD product "NEW ELD WORLD 1.3".
For contact information and additional devices produced by the same vendor see their page
NEW ELD WORLD INC.
Drivers Manual NEW-ELD-WORLD.COM Attention For legal and safety purposes, please refrain from calling your office, customer support line, of safety personnel while driving. ELD Installation Installation ELD Device Step 1. Make sure that your vehicles engine must be OFF. If the engine is ON,please turn it off and turn the key the Off position before connecting to the ELD device. 1 2 3 4 Step 2. Locate the diagnostic port inside your vehicles cabin. The diagnostic port is typically located in one of the following places: 1 under the left side of the dashboard, 2 under the steering wheel, n3 near the drivers seat, 4 under the drivers seat. ELD Installation Installation ELD Device Step 3. To connect the ELD plug it into the diagnostic port of the vehicle. Unscrew the lock surface until it locks. Make sure the ELD is connected. Step 5. Then, get the tablet provided by fleet and turn it on. Tablet should automatically start application. Step 4. Once plugged in the device will start syncing with the engine control module (ECM) and New ELD World application on the tablet. Application guide Downloading Application For Android Devices Type New Eld World into the search bar of Google Play Store. Tap on Install button to download the app into your device. For IOS Devices Type New Eld World into the search bar of App Store. Tap on Get button. Tap on Install button to download the app into your device. Application guide Permission for resources First of all app need to get access to bluetooth and location for exchanging data between drivers mobile device and ELD device. Application guide Signing In Driver can enter the app by using username and pasword which created for exactly for this driver. Application guide Connect ELD By touching on the screen of mobile device application can get IP Adress of the ELD. By pressing Connect button ELD device starts working with our application. Your cellular device will automotically scan ELD. Scanning... Application guide Logs screen The view of logs screen of the application. Driver must swipe screen up to down by time to reload new data and refreshing the screen. Application guide Duty statuses notification In this section driver can see time indicators value which belongs to his/her duty status. From the statuses in the main window, driver can select a status depending on situation Drivers graph will be shown here. To change duty status driver have to click this + icon button. Application guide Notification Drivers errors, violations and messages related to him/her work statuses can be seen in the notifications section. Application guide Changing status To change current status to another one driver must pick one status then press save button. Application guide Driver on the road Once you have connected your mobile device to NEW, your driving time automatically recorded. When your vehicle begins moving, your duty status will automatically be set to Driving. At 5 mph (or more) the vehicle is considered Drive. When driver stops moving, Drive screen waits for 3 minutes, if the speed does not exceed at 5mph (or more) the Drive status will be exited. Application guide Editing status Go to the main Logs screen. Click on any log from the logs table. Application guide Editing status The page which this logs info placed will be opened. Then click Edit button. Application guide Editing status You will be able to change the timeline of the chosen status: tap on the timeline and move it right to prolong, or left to shorten it. Also, you can edit the status timeline by using the fields From and To To edit the type of the status, tap on the needed status from the list of the offered statuses. Press Save to save changes. Application guide Shipping document In navigation bar Profile section which driver can fill Shipping document information fields. Application guide Certification In navigation bar Certify section which driver create own signature and sign his/ her duty days. Also unsigned days will be appear here. Application guide Menu There is Menu section in navigation bar. It shows general information and events. Such as Inspection, DVIR, Co-driver, Chat etc. General information about each ones is given in the next page. Application guide Drivers account By clicking avatar in the menu page driver can open his/her own information. Application guide Inspection For representing required reports driver can go with Inspection section and generate it. Generated daily report view is below. Application guide Inspection In next opened window, type your comment and click on the send button for transfering it. Application guide DVIRs adding new DVIR DVIR page will be shown like this. There are recent DVIRs and its issues type and with current status(fixed or not). issue created time issue isnt fixed yet issue fixed The page for creating a new DVIR. Application guide Co-Driver adding new DVIR Co-driver name switching with Co-Driver By clicking Co-Drivers name can search and change his/her Co-Driver to another one. In Co-Driver page driver can see his/her Co-Driver and switch with him. Application guide Light/Dark modes By clicking this section interface mode can change from Light mode to the Dark mode and vice versa. www.NEW-ELD-WORLD.COM