User manual for "TTELD 40"

USERS MANUAL FOR ELD

799 N Court Street, Suite 7
Medina OH 44256

833-907-0707

[email protected]

INSTALL TTELD ELD IN YOUR VEHICLE
1 Make sure your vehicle engine is turned off. If the engine is
on, please turn it off and turn the key to the Off position
before connecting ELD device

INSTALL TTELD ELD IN YOUR VEHICLE
4 Once plugged in, the device will start syncing with the
engine control module [ECM] and TTELD ELD
application on the tablet.

2 Locate the diagnostic part inside your

vehicles cabin. The diagnostic part is
typically located in one of the
following places (picture 1):
1. Under the left side of the
dashboard;
2. Under the steering wheel;
3. Near the drivers seat;
4. Under the drivers seat.

Picture 1

3 Attach the TTELD ELD plug into the diagnostic part of
the vehicle. Twist the plug base until it locks into place.

Picture 3

5 Then get the tablet provided by fleet and turn it on. Tablet
should automatically start application.

Picture 2
1

2

APPLICATION GUIDE

APPLICATION GUIDE
1 Log into application using your User Name and Password
(picture 4). If you do not have TTELD ELD account, please
contact your fleet manager.

4

If the ELD is connected to vehicle driver can see green
icon on top right side of dashboard (picture 7).

Picture 4

2 Your cellular device will automatically scan ELD (picture 5)

Picture 7

Picture 5

3 Driver should choose ELD (picture 6).

3

Picture 6

4

USING TTELD ELD ON THE ROAD
1 Once you have connected your mobile device to TTELD

USING TTELD ELD ON THE ROAD
3

ELD, your driving time automatically recorded.
When your vehicle begins moving, your duty status will
automatically be set to Driving.
At 5 mph (or more) the vehicle is considered to Drive
and On Duty (picture 8).

When driver stops status on top left changes from In motion
to Stationary and Change duty status will appear. If driver
not takes an action after 80 sec, another button CONTINUE
DRIVING and countdown circle will appear (picture 10).

Picture 10
Picture 8

2

Swipe
sign (top left corner of the app) to
switch to Night Mode.
Swipe
sign to switch back to the Day Mode
(picture 9).

Picture 9
5

4

If no action taken app will change status to Off mode
(Picture 11).

Picture 11
6

USING TTELD ELD OFF ROAD
1 Select the status Off Duty, Sleeper, On Duty (picture
12).

USING TTELD ELD OFF ROAD
3 Insert missing status (On Duty, Sleeper or Off Duty)
by tapping or edit existing status by tapping
corrections are needed (picture 14).

if any

Picture 12
Picture 14

2 Fill out location field and put remarks, such as Pre-trip
inspection or Coffee break (if the location field is left
empty, it will be automatically set) (picture 13).

7

Picture 13

4 Choose the status you want to change and set the time frame
(picture 15).

Picture 15
8

OTHER OPTIONS
1 Go to Documents options available from the main screen:

OTHER OPTIONS
3

Choose status to change or add new status (Driver can go to
previous time frame to make changes (picture 16).

Make a Driver Vehicle inspection report [DVIR] go to
DVIR (picture 18).

Picture 16
Picture 18

2

Put your recording and save to system at MAIN (picture 17).

Picture 17

9

4

Insert the status of the vehicle, if defect is detected tap
ADD DEFECT (picture 19).
And choose defect from list unit and trailer

Picture 19

10

OTHER OPTIONS

OFFICER INSPECTION
Its easy to provide on officer with your driving information.

1 Tap NEXT and put your signature to verify. If defects
are corrected mechanics signature required (picture
20).

2
Picture 20

1 Tap Menu bar icon on the top left corner and select
INSPECTIONS (picture 21).

Picture 21

2 Tap Begin inspection and show your electronic logbook 8day summary to the officer (picture 22).

The application will generate the report for the officer

11

Picture 22

12

TRANSFER ELD RECORDS TO AUTHORIZED
SAFETY OFFICER INSPECTION
1 Tap Menu bar icon on the top left corner and select

3 Select Send electronic log book to DOT (picture 23).

INSPECTIONS (picture 21).

Picture 23

Picture 21

2 Tap Send electronic log book to DOT and show your

4 Type Output File Comment and tab Send (picture 24).

electronic logbook 8-day summary to the officer (picture 22).

Picture 22
13

Picture 24
14

SETTINGS
1 Choose Settings from the bottom, where driver change
general settings from Configurations, switch to codriver or Change password (picture 25).

ELD MALFUNCTIONS
395.22 Motor carrier Responsibilities
A motor carrier must ensure that its drivers possess
onboard a commercial motor vehicle and ELD information
packet containing the following items:
An instruction sheet for the driver describing ELD
malfunction reporting requirements and recordkeeping
procedures during ELD malfunctions.
The following instructions are in accordance with the
guidelines set forth in 395-34

Picture 25

1 From menu list choose Configurations to change
sound settings, violations visibility, to change password
(picture 26).

GPSTab ELD will monitor and report malfunction data base on
section 4.6 ELDs Self-Monitoring of Required Functions table 4:
P  Power compliance malfunction,
E  Engine synchronization compliance malfunction,
T  Timing compliance malfunction,
L  Positioning compliance malfunction,
R  Data recording compliance malfunction,
S  Data transfer compliance malfunction,
O  Other ELD detected malfunction.

Picture 26
15

16