User manual for ""

Paperless Solution

USER
MANUAL
(323) 927-7385

[email protected]

190 Ashworth ave 3B
Hampton,NH, 03842

www.stleld.com

How to install
ELD device
01

Make sure your vehicle engine is turned off. If the engine is ON,
please turn it off and turn the key to the OFF position before
connecting ELD device.

02
02
03

Locate the diagnostic part inside your vehicles cabin. The
diagnostic part is typically located in one of the following places.

02
04
03
05

under the left side of the dashboard;
under the steering wheel;
near the drivers seat;
under the drivers seat;
Connect the ELD plug to the diagnostic part of the vehicle.
Unscrew the lock surface until it locks. Make sure the ELD is
connected.

04
Once plugged in,the device will start syncing with the engine
06
04
05 control module [ECM] and STLELD application on the tablet.
07
04
Then get the tablet provided by fleet and turn it on. Tablet should
06
05
05 automatically start application.
07
07
06

02
Connecting port

Application
guide

03

01
Log in to application using your
username and password.
If you dont have an STL ELD account, please,
contact to your carrier. If you dont remember
your

password,

you

can

reset

by

clicking

Forgot password?, or contact to your carrier

02
Your tablet with STL ELD application
will automatically scan for ELD.
When you log in to your STL ELD account, the
app starts scanning for available ELD devices
automatically. And the ELD device lights green,
when it is ready to use.

Application
guide

04

05

Application
guide

03
You should choose shown ELD

04
If the ELD is connected to vehicle, you
can see green icon on the top left
corner of the dashboard.

Once the scanning is complete, select your

If it is not connected, the Bluetooth icon will be

ELD device from the displayed list of results.

grey out which indicates ELD is disconnected

Using STL ELD on
the road

01
Once you have connected your mobile
device to ELD, your driving time is
automatically recorded.
When your vehicle starts moving, your duty
status will be automatically set as Driving.
Vehicle will be on Driving and On duty
statuses when it reaches the speed of at least
5 mph.

06

Using STL ELD on
the road

02
Choose a status in the main window
based on your current situation.
From the statuses in the main window, select
"Off Duty", "Sleep", "On Duty" depending on
your situation

07

03
Fill out location field and input
remarks, such as Pre-trip inspection
or Coffee break (if the location field
is left empty, it will be automatically
set).

Review ELD
logs
01
Tap icon at the bottom and select
Inspection.

Follow the given guidelines
to show your records to the

08

officer

02
Tap Begin inspection and show your
electronic logbooks eight-day
summary to the officer.

Transfer ELD records to authorized
safety officer inspection
01
Select Send ELD Output File to DOT
in order to send your electronic
logbooks data to DOT.

Follow the given guidelines
to show your records to the

09

officer

02
In the newly opened window, write
your comment and click the Send
button.

ELD
Malfunctions

!

10

395.22 Motor carrier Responsibilities
A motor carrier must ensure that its drivers possess onboard a
commercial motor vehicle and ELD information packet containing
the following items: An instruction sheet for the driver describing
ELD malfunction reporting requirements and record-keeping
procedures during ELD malfunctions.

The following instructions are in accordance
with the guidelines set forth in 395-34
STL ELD will monitor and report malfunction data based on
section 4.6 ELDs Self-Monitoring of Required Functions:
P  Power compliance malfunction,
E  Engine synchronization compliance malfunction,
T  Timing compliance malfunction,
L  Positioning compliance malfunction,
R  Data recording compliance malfunction,
S  Data transfer compliance malfunction,
O  Other ELD detected malfunction.