User manual for "SECURE ELD"

SECURE ELD

SECURE ELD produces accurate driver logs automatically
in compliance with FMCSA regulations.

Hours of Service Records
The ELD system was developed according to the technical standard
and supports inter and intrastate HOS rules and exceptions.

Easy-to-Use Software
Log management is intuitive and fast. The logbook app and online
eet manager portal are easy-to-use. Each user gets different access
credentials precongured with appropriate permissions.

Inspection Mode
The DOT Inspection mode allows drivers to access RODS with a few
taps to display them for the ofcer. Email and web services are
available to transfer RODS upon request.

Get Your Secure ELD Up and Running
Hardware Installation
Connect the cable to the hardware piece and then to the 9- or 6-pin
or OBDII port. The device must be secured to the dashboard where it
is visible to the driver and from outside the cabin.

Mobile App Download and Login
On your mobile device, go to the app platform and download and
install the driver app. Log in with your username and
passwordthese must be provided to you by the eet manager.
Select your vehicle to sync the app to the hardware, and you will be
ready to start driving.

Hours of Service Rules
Go to the Main Menu and then to Rules to review the rules congured
on your prole, including your cycle, cargo type, and other
information, such as authorization of personal conveyance and yard
moves.

Status Information
Go to the main menu and tap on Status to display information about
your current shift:
 Remaining hours in the current shift.
 Remaining driving time.
 Required break time.
 Required off-duty time.
To update your status, tap on the arrow inside the Status Circle,
select your new status, and press Update.

Manage and Annotate Driver Logs

Apart from driving time, you can edit your logs if there is incorrect or
missing information. Select Logs from the main menu and nd the duty
status you need to edit. Tap on it and then on the Pencil to enable
changes. To add events, tall on the Plus sign. Once you have captured
all the necessary information, ll the form and tap Certify and sign
your logs.

O-Line Logs
Cellular connection might fail for a number of reasons. If this
happens, you will see a signal at the top of your screen. A loss of
signal will halt data transfer to the online portal. Still, it will not
disable the automatic recording of RODS.
The data collected by the system during the disconnection will
transfer to your online portal once the cellular signal returns.

Inspect Vehicles and Notify Defects

Driver vehicle inspection reports can be created before or after trips.
Go to the main menu and tap on DVIR. Tap on the plus sign to create a
new report, select any defective components, and sign the report.
You can access past reports and edit them or conrm the defects
have been corrected.

Violations Alerts
1

!

!

To help you with compliance, you will receive alerts on potential and actual HOS
violations, as well as missing data.
Active violations will be listed below the graph grid, including those pertaining
to the infraction of cycle, shift, or driving limits, and break violations.