User manual for "Isotrak Mobile Compliance Pack"
Below you will find the vendor provided user manual for the ELD product "Isotrak Mobile Compliance Pack".
For contact information and additional devices produced by the same vendor see their page
Isotrak Inc..
Isotrak Mobile Compliance Pack October 2017/ V1.0.1718-1719 Isotrak Contents 1 Main Screen ............................................................................................................................................... 5 1.1 Using the HOS Action Bar.................................................................................................................... 5 2 Customizing the HOS App Preferences ...................................................................................................... 6 2.1 Hours of Service Settings .................................................................................................................... 7 2.1.1 Set Hours of Service Preferences ................................................................................................. 7 2.1.2 Capturing the Drivers Signature.................................................................................................. 7 2.1.3 Customizing the Carrier Information ........................................................................................... 9 2.1.4 Driving Rules .............................................................................................................................. 10 2.2 GPS Preferences ................................................................................................................................ 21 2.3 Device Preferences ........................................................................................................................... 22 3 Familiarizing the Hours of Service Main Screen Tiles .............................................................................. 26 3.1 Time Remaining Tile .......................................................................................................................... 26 3.2 Changing the Drivers Duty Status .................................................................................................... 27 3.3 Recap................................................................................................................................................. 29 3.4 Start Break......................................................................................................................................... 29 3.5 Data Transfer .................................................................................................................................... 31 3.6 Options .............................................................................................................................................. 34 3.7 Logs ................................................................................................................................................... 35 3.8 DVIR................................................................................................................................................... 35 3.9 Shift/Cycle ......................................................................................................................................... 36 4 Check Driver Availability .......................................................................................................................... 37 5 Driver Logs ............................................................................................................................................... 38 5.1 Using the Driver Logs Bulk/ Multiple Selection Functions ................................................................ 39 5.2 The Driver Logs Accordion Header Features..................................................................................... 39 5.2.1 Daily Drivers Log Entry Check-box (Uncertified Log) ................................................................ 39 5.2.2 Daily Drivers Log Entry Check-box (Already Certified) .............................................................. 40 5.2.3 Daily Drivers Title Log (Recertify Log) ....................................................................................... 40 Page 2 Isotrak Inc 2017 1 (404) 793 0290 | [email protected] | www.isotrak.com Isotrak 5.2.4 Recap.......................................................................................................................................... 40 5.2.5 Daily Drivers Log Grid ................................................................................................................. 41 5.2.6 Edit Daily Drivers Log Form ........................................................................................................ 42 5.2.7 Shipment Details ........................................................................................................................ 43 5.2.8 Miles Driven by State ................................................................................................................. 44 5.2.9 DVIR............................................................................................................................................ 45 5.2.10 Certify a Log ............................................................................................................................. 46 5.2.11 Edit a Log .................................................................................................................................. 48 5.3 Malfunction and Data Diagnostic Events .......................................................................................... 58 5.4 DVIR................................................................................................................................................... 67 5.4.1 DVIR Feature Main Navigation Menu ..................................................................................... 67 5.4.2 DVIR Feature Hours of Service Main Screen ........................................................................... 67 5.4.3 Selecting Your DVIR Type ........................................................................................................... 69 5.4.4 Starting Your DVIR...................................................................................................................... 70 5.4.5 Completing the First DVIR Area ................................................................................................. 70 5.4.6 Capturing an Image of a DVIR Item ............................................................................................ 71 5.4.7 Add a Comment or Remark to a DVIR Item ............................................................................... 71 5.4.8 Finishing / Certifying Your DVIR ................................................................................................. 72 5.4.9 Submit or Certify the DVIR ......................................................................................................... 75 5.4.10 Deleting a Vehicle DVIR............................................................................................................ 76 5.5 DVIR History ...................................................................................................................................... 76 6 Roadside Inspection ................................................................................................................................. 76 6.1 Roadside Inspection Main Navigation Menu ................................................................................. 78 6.2 Roadside Inspection HOS Main Menu ........................................................................................... 79 6.3 Inspection Screen Start Review...................................................................................................... 79 6.4 Roadside Inspection Screen Data Transfer .................................................................................... 80 7 Switch Equipment .................................................................................................................................... 81 7.1 Switch Equipment Main Navigation Menu .................................................................................... 81 7.2 Options Menu ................................................................................................................................... 82 7.3 Switch Equipment DVIR Screen...................................................................................................... 82 7.4 Switching Equipment ........................................................................................................................ 83 Page 3 Isotrak Inc 2017 1 (404) 793 0290 | [email protected] | www.isotrak.com Isotrak 7.5 Managing Vehicles / Trailers ............................................................................................................. 84 7.5.1 Manage Vehicles / Trailers Delete .......................................................................................... 85 7.5.2 Manage Vehicles / Trailers - Edit ............................................................................................... 86 7.5.3 Manage Vehicles / Trailers Add .............................................................................................. 86 8 Documents ............................................................................................................................................... 88 8.1 Documents Main Navigation Menu ............................................................................................... 89 8.2 Documents Options Menu ............................................................................................................. 90 8.3 Adding Documents ............................................................................................................................ 91 8.4 Editing / Deleting a Document .......................................................................................................... 92 9 Add Fuel Receipts ..................................................................................................................................... 93 9.1 Main Navigation Menu ..................................................................................................................... 93 9.2 Fuel Receipts Screen ......................................................................................................................... 94 9.3 Adding Fuel Receipts ......................................................................................................................... 94 9.4 Editing or Deleting a Fuel Receipts ................................................................................................... 96 10 Co-Drivers............................................................................................................................................... 98 10.1 Logon Co-Driver .............................................................................................................................. 98 10.2 Switch Driver ................................................................................................................................. 104 11 Shipping Documents ............................................................................................................................ 105 12 Add Remark.......................................................................................................................................... 107 13 Exempt Driver ...................................................................................................................................... 108 14 Logout .................................................................................................................................................. 109 15 Unidentified Driving Events ................................................................................................................. 110 16 Warning Features ................................................................................................................................. 111 17 List of Login Errors................................................................................................................................ 114 Page 4 Isotrak Inc 2017 1 (404) 793 0290 | [email protected] | www.isotrak.com Isotrak 1 Main Screen The Hours of Service main screen is where you log your duty status events and which, in turn, determines your compliance with FMCSA Hours of Service Regulations. This screen also serves as your gateway to the rest of the apps features. The main screen also provides essential information about the apps user: Driver Name: Displays the name of the driver who is logged in and whose logs are displayed Vehicle Name: Displays the drivers vehicle name Trailer Name: Displays the drivers Note: Can tap Vehicle and Trailer name to display Switch Vehicle Dialog. 1.1 Using the HOS Action Bar The HOS Action Bar is the starting point for navigating to the different pages within the app and is always present in the apps topmost portion: The action bar features the following navigational controls of the app: Action Tool Name Action Tool Icon Description Main navigation hamburger Tap to open the main navigation menu of the application Refresh Button Tap to manually refresh the data in the app page. Hidden under all icons are present. Logout Button submenu icon once Tap to log out of the app, this will also set your status to Off Duty. Hidden under submenu icon once all icons are present. Page 5 Isotrak Inc 2017 1 (404) 793 0290 | [email protected] | www.isotrak.com Isotrak Malfunction Button Tap to see uncleared Malfunctions Data Diagnostics Button Tap to see uncleared Data Diagnostics. Turns into an accent color (based on the apps theme) if there are new events and turns white when already viewed. VBUS Connectivity Indicates that the device is connected to a VBUS device and turns to when disconnected. Hence, connection interruptions may occur which will turn into flashing icon while in a reconnecting state. Tap to display the pending edit request dialog, edit request is from Motor Carrier Edit Suggestions, correction of errors with Team Drivers, and Events logged under Unidentified Driver Profile. Tap to display a dialog to Connect to Vehicles VBUS Device. It has the same Pending Edit Request Button Connect Button capabilities as the VBUS icon . 2 Customizing the HOS App Preferences The apps settings and preferences can be customized in the Hours of Service Preferences screen. To navigate to this part of the app, select the icon or swipe the screen to the right to display the main navigation menu, select the Settings option and then select the Hours of Service option, this will display the Settings screen. Page 6 Isotrak Inc 2017 1 (404) 793 0290 | [email protected] | www.isotrak.com Isotrak 2.1 Hours of Service Settings 2.1.1 Set Hours of Service Preferences This is where the basic driver, vehicle, carrier and shipping data is entered and stored within the app. The identification data stored here is then used by the app, web portal and in the drivers daily log report. After logging in to the app for the first time When the app is used for the first time, the driver is taken directly to the Main Dashboard after which a Select Equipment dialog box will be displayed requiring the driver to select a vehicle and trailer (if needed). 2.1.2 Capturing the Drivers Signature The app can capture the signature of the driver which is then used for digitally certifying a log. To create the driver signature, select the main navigation hamburger , select the Settings option and then select Hours of Service: Page 7 Isotrak Inc 2017 1 (404) 793 0290 | [email protected] | www.isotrak.com Isotrak The Driver Information section of the screen will be displayed along with nay signature that has been created for the driver. Tap on the icon to create or change the signature. Create or update your signature in the app by using your finger to create your signature Page 8 Isotrak Inc 2017 1 (404) 793 0290 | [email protected] | www.isotrak.com Isotrak Tap the Done button to save your signature. You can also select the Clear button to clear the captured signature and start again 2.1.3 Customizing the Carrier Information The carrier information can also be set from within the Hours of Service section (main navigation hamburger > Settings > Hours of Service) scroll the screen down to the Carrier Information section: Page 9 Isotrak Inc 2017 1 (404) 793 0290 | [email protected] | www.isotrak.com Isotrak Enter details for the following: Carrier Name Carrier DOT Number Main Office Address Phone Number Home Terminal Details of the driver Note: Drivers have the ability to make the Carrier Information and DOT number editable on the mobile device when the Account enabled the 'Allow driver editing of carrier information' which can be seen in the portal->settings->account settings under Carrier Information. 2.1.4 Driving Rules This is where you change the HOS rules or the Federal Motor Carrier Safety Administrations (FMCSA) regulations that govern the hour that a commercial vehicle driver can legally accumulate driving or being on duty for a motor carrier in a working day and week. This is also where you apply the HOS rules exceptions. The driving rules can also be set from within the Hours of Service section (main navigation hamburger > Settings > Hours of Service) scroll the screen down to the Driving Rules section: Page 10 Isotrak Inc 2017 1 (404) 793 0290 | [email protected] | www.isotrak.com Isotrak Select the appropriate HOS rules that you would like the app to use from the drop down list. You can customize the region, cycle, cargo, exceptions and time zone rules Region This is where you can set the region, options are USA and Canada. The cycle and exceptions displayed is dependent on which region has been set by the driver. Note: If the region selected is Canada, then the condition Canada Off-Duty Deferral is enabled. This means that you are allowed to get an extra two hours of driving and on duty in a 24 hour period (day 1) and take the required extra two hours off on the following day (day 2). The Deferral status is shown on the Drivers Daily Logs Cycle This is where you can set the consecutive multi-day duty period which the driver will follow. Choosing a cycle will take into effect the corresponding legal limitations on the hours that can be used by the driver in a 7 day or 8 day working cycle. Available Cycle Rules Options Interstate - Federal Rules Cycle Shift Limit Drive Limit Until Break Break Left US60hr7days 7 days 14 hours 11 hours 8 hours 30 minutes US70hr8days 8 days 14 hours 11 hours 8 hours 30 minutes Alaska70hr7days 7 days 20 hours 15 hours 8 hours 30 minutes Alaska80hr8days 8 days 20 hours 15 hours 8 hours 30 minutes California80hr8days 8 days 16 hours 12 hours N/A N/A Intrastate Cycle Rules Page 11 Isotrak Inc 2017 1 (404) 793 0290 | [email protected] | www.isotrak.com Isotrak Cycle Shift Limit Drive Limit Break Limit Florida 70hr7days 7 days 16 hours 12 hours N/A Florida 80hr8days 8 days 16 hours 12 hours N/A Illinois 60hr7days 7 days 14 hours 11 hours N/A Illinois 70hr8days 8 days 14 hours 11 hours N/A Maryland 70hr7days 7 days 16 hours 12 hours N/A Maryland 80hr8days 8 days 16 hours 12 hours N/A Massachusetts 60hr7days 8 days 14 hours 11 hours N/A Massachusetts 70hr8days 8 days 14 hours 11 hours N/A Michigan 60hr7days 7 days 14 hours 11 hours 30 minutes Michigan 70hr8days 7 days 14 hours 11 hours 30 minutes New Hampshire 60hr7days 7 days 14 hours 11 hours N/A New Hampshire 70hr8days 8 days 14 hours 11 hours N/A New York 60hr7days 7 days 14 hours 11 hours N/A New York 70hr8days 8 days 14 hours 11 hours N/A North Carolina 70hr7days 7 days 16 hours 12 hours N/A North Carolina 80hr8days 8 days 16 hours 12 hours N/A Pennsylvania 60hr7days 7 days 14 hours 11 hours N/A Pennsylvania 70hr8days 8 days 14 hours 11 hours N/A South Carolina 70hr7days 7 days 16 hours 12 hours N/A South Carolina 80hr8days 8 days 16 hours 12 hours N/A Tennessee 60hr7days 7 days 14 hours 11 hours N/A Page 12 Isotrak Inc 2017 1 (404) 793 0290 | [email protected] | www.isotrak.com Isotrak Tennessee 70hr8days 8 days 14 hours 11 hours N/A Texas 70hr7days 7 days 15 hours 12 hours N/A Wisconsin 70hr7days 70 days 16 hours 12 hours 30 minutes Wisconsin 80hr8days 80 days 16 hours 12 hours 30 minutes Vermont 60hr8days 7 days 14 hours 11 hours N/A Vermont 70hrs8days 8 days 14 hours 11 hours N/A Virginia 70hr7days 7 days 16 hours 12 hours N/A Virginia 80hr8days 8 days 16 hours 12 hours N/A Cycle Shift Limit Drive Limit Break Limit Canada 70hr7days South 7 days 16 hours 13 hours 30 minutes Canada 120hr14days South 7 days 16 hours 13 hours 30 minutes Canada 80hr7days North 7 days 20 hours 15 hours 30 minutes Canada 120hr14days North 7 days 20 hours 15 hours 30 minutes 15 hours 13 hours 30 minutes Canada Cycle Rules Alberta Province Page 13 Isotrak Inc 2017 1 (404) 793 0290 | [email protected] | www.isotrak.com Isotrak Any of the above cycle rules are depending on the region selected and can be applied given the appropriate rule from the region drop down list Intrastate to Interstate driving rules If the driver is operating in intrastate mode and is crossing over a state line then the app automatically switch to federal rules. A dialog will display confirming that the driving rules has changed right after crossing boundaries. Example: SouthCarolina80hr8days to US70hr8days or SouthCarolina70hr7days to US60hr7days Page 14 Isotrak Inc 2017 1 (404) 793 0290 | [email protected] | www.isotrak.com Isotrak Interstate to Intrastate driving rules The driver must also follow the Federal HOS regulations for a short period of time having done operating in interstate commerce. If the driver were using the 60-hour/7-day schedule, he must follow the Federal HOS regulations for the next 7 days having done operating in interstate commerce. If you were using the 70-hour/8-day schedule, you must follow the Federal hours-of-service regulations for the next 8 days after you finish operating in interstate commerce. Note: To perform intrastate check, enable the option available in the Settings > HOS Preferences (however this check is optional). The user has the ability to whether or not perform the checking. Also, it is important for the driver to monitor the cycle used for the past 7 or 8 days. Cargo This will set the applicable Hours of Service rules for property carrying or passenger carrying commercial vehicles. Available Cargo Rules Options Property the 11 and 14 hours rule will apply Passenger the 10 and 15 hours rule will apply Page 15 Isotrak Inc 2017 1 (404) 793 0290 | [email protected] | www.isotrak.com Isotrak Either of the above cargo rules can be applied by selecting the appropriate rule from the drop down list Exceptions The options that appear when tapping the Exceptions button will allow the driver to avail of exceptions from the Hours of Service rules for as long as certain conditions are met as stipulated the Hours of Service section of the Code of Federal Regulations (49 CFR Part 395.1-Hours of Service of Drivers-Scope of rules in this part) and other pertinent FMCSA regulations. Available US Exceptions Options 2 Hour Driving Extension for Adverse Driving Conditions Relief from all driving rules for Emergency Conditions Oilfield Operations with 24 hour restart 30 Minute Break Exemption for Short-Haul Drivers No Logs for Short-haul Drivers operating within 100 air miles or Non-CDL-Drivers operating within 150 air miles 24 Hour Restart for Construction, Groundwater well-drilling 16 Hour Driving Window Page 16 Isotrak Inc 2017 1 (404) 793 0290 | [email protected] | www.isotrak.com Isotrak Note: 16 Hour Driving Window exception can only be used once for the last 7 days or in every 70hr cycle, if the driver attempted to enable the exception an error dialog will display stating the following: However, it is possible for the driver to add another 16 Hour Driving Window exception when a cycle reset has occurred. Nevertheless the driver will need to wait for the current cycle to end to be able to add the exception again. Utility Service Vehicle 30 Minute Break Exemption for Specialized Carriers & Rigging Association (SC&RA) Agricultural Operations Transport of Commercial Bees, Livestock Hi-rail 2 hour travel exclusion - 395.1(w) Driver salesperson - 395.1(c) Select the appropriate exception from the list; you must then enter a reason for applying the exception in the Enter reason for exception(s) field. Once complete, select the OK option to apply the selected exception Note: Exceptions are different depending on the Region selected. Page 17 Isotrak Inc 2017 1 (404) 793 0290 | [email protected] | www.isotrak.com Isotrak Available Canada Exceptions Options 2 Hour Driving Extension Special Permit Oil Well Service permit CanEmergencyConditions 2 Hour Driving Extension for Adverse Driving Conditions No Logs for drivers operating within 160km of home terminal Available Alberta Province Exceptions Options CanEmergencyConditions 2 Hour Driving Extension for Adverse Driving Conditions Page 18 Isotrak Inc 2017 1 (404) 793 0290 | [email protected] | www.isotrak.com Isotrak Time Zone Select the drivers Home Terminal time zone. Time zones available are: America/Anchorage Eastern Time (EST5EDT) Central Time (CST6CDT) Mountain Time (MST7MDT) Pacific Time (PST8PDT) Canada/Newfoundland Asia/Manila Atlantic PDF Report Email Recipients You can set the default recipients of your Driver Daily Log PDF report in the part of the Settings Menu. Enter the email address or addresses that will become a recipient or recipients of the Hours of Service apps Daily Driver Log PDF report. The email addresses must be separated by a comma (,) Page 19 Isotrak Inc 2017 1 (404) 793 0290 | [email protected] | www.isotrak.com Isotrak Mode A mode option to switch between 395.15 (ABORD) and 395.20 (ELD) support is available. When 395.15 (AOBRD) mode is selected it turns off all 395.20 (ELD) features. It simply records the drivers events regardless to the FMCSA rules. When in AOBRD mode, disable the data transfer button in the Options screen and changed button to Email Logs in the Roadside Inspection screen. Page 20 Isotrak Inc 2017 1 (404) 793 0290 | [email protected] | www.isotrak.com Isotrak Lock Screen Style The user has the ability to control the lock screen display. There are two (2) types available: new 'Remaining to violation' lock screen or the old '4 clocks' lock screen. 2.2 GPS Preferences The user has the ability to change on where to get the devices GPS positions. Page 21 Isotrak Inc 2017 1 (404) 793 0290 | [email protected] | www.isotrak.com Isotrak 2.3 Device Preferences Application Update Interval Updates application every 3 minutes (or depending on the choice of the driver) Unit of Distance Setting the default unit of measures Disable Notification Sound The application has a Mute button to silence all sounds that could come from the application. Also, the ELD rules state that all application sounds should be muted during Sleeper status. However, the mobile device should not be muted since its needed to be on sound in case of phone calls. Page 22 Isotrak Inc 2017 1 (404) 793 0290 | [email protected] | www.isotrak.com Isotrak Note: When the current status is Sleeper Berth, it automatically mutes the application sound. Color Theme Displays option for selecting Color Theme Page 23 Isotrak Inc 2017 1 (404) 793 0290 | [email protected] | www.isotrak.com Isotrak Night Theme By default, the application automatically changes to a night theme based on the sunset time calculated from the device's location. If location is not available, local time of the device is used. Page 24 Isotrak Inc 2017 1 (404) 793 0290 | [email protected] | www.isotrak.com Isotrak Language Support The app also supports language translation for French-Canadian (Francais (Canada)) and Spanish (Espaol (Estados Unidos)). To enable the translation, go to the Android Device Settings > Language and Input > Language. Select between the supported language and the translation will take effect immediately. Page 25 Isotrak Inc 2017 1 (404) 793 0290 | [email protected] | www.isotrak.com Isotrak 3 Familiarizing the Hours of Service Main Screen Tiles 3.1 Time Remaining Tile When the time remaining tile displays a grey color, it indicates that the driver is Off Duty, Sleeper or Waiting at Well Site; when the tile displays a green color, it indicates that the drivers status is Driving or On Duty; when the tile displays an amber color, it indicates that the drivers status is Driving or On Duty and has less than 3 hours left; when the tile displays a red color, it indicates that the drivers status is Driving or On Duty and has less than 1 hour left or has already ran out of time. Page 26 Isotrak Inc 2017 1 (404) 793 0290 | [email protected] | www.isotrak.com Isotrak Tap the time remaining panel to view the Time Remaining Clocks The time remaining clocks are color coded to match the time remaining panel 3.2 Changing the Drivers Duty Status To change the duty status of the driver, tap the Duty Status button and select the appropriate driver duty status from the drop down list. Available Duty Status Options Duty Status Icon Duty Status Duty Status Icon Duty Status Off Duty On Duty Sleeper Berth Waiting at Site Driving Page 27 Isotrak Inc 2017 1 (404) 793 0290 | [email protected] | www.isotrak.com Isotrak Selecting a status from the drop down list will show the Create Event pop up dialog. You can adjust the duration of the duty status event by tapping the Previous 15 minutes Time Interval button to increase the time duration and the Next 15 minutes Time Interval button to decrease the time duration. However, these buttons are disabled prevent time from going before or after the current day. (eg. 12:00AM 11:59PM). If personal use is enabled, the status will be set to Off Duty automatically and will disable the other checkboxes. Selection of this option will be recorded within the events history. If Yard moves is enabled, the status will be set to On Duty automatically and will disable the other checkboxes. Selection of this option will be recorded within the events history. Note: all options are enabled in all events When the app is able to obtain a valid GPS fix, the Location field will be automatically populated with the current location information of the user. If there is no GPS fix, the Location field will remain blank, in this instance; you must manually input the relevant details. Once all relevant details have been entered and the correct duty status selected, tap the OK button to save the new duty status event. You can also select the Cancel button to cancel adding the selected duty status. Changing the status to On Duty or Driving also enables the options for Personal Use and Off Road. Personal Use is mentioned in the FMCSAs Supplemental Proposal, which was Page 28 Isotrak Inc 2017 1 (404) 793 0290 | [email protected] | www.isotrak.com Isotrak published on March 28, 2014, that mandates ELDs for most drivers of CMVs that currently log. The proposal says that ELDs may be set up to allow drivers to put themselves in a special driving category called personal use. When a driver selects this option, the ELD will record the time as off duty until the driver de-selects the option. Off Road, on the other hand, means that the vehicle is running on rough terrain. Lastly, Yard Moves, has been established under a mandate which allows a driver or another personnel to perform duties like moving trucks around the home yard by establishing a single set of thresholds for all ELDs in an On Duty, not Driving status without triggering the device by reaching the thresholds. 3.3 Recap Tap the Recap button to bring up the recap information for the specified duty day and corresponding cycle data 3.4 Start Break The Start Break button will be disabled when the duty status is Off Duty, Sleeper Berth or Waiting at Well Site. Page 29 Isotrak Inc 2017 1 (404) 793 0290 | [email protected] | www.isotrak.com Isotrak The Start Break button will be enabled when the duty status is On Duty or Driving. Once you tap the Start Break button, a pop up dialog will be displayed asking you to confirm that you wish to start your break. If the Start Break button is pressed, then: o o o It sets the status to OffDuty The Start Break button turns to End Break The Time remaining button turns to On Break and the second line shows time remaining 00:00 If the End Break button is pressed, then: o It sets the status to On Duty (if the vehicle is not moving) or Driving (if the vehicle is moving) Note: An audible alert activated when 30 minute break is over. Page 30 Isotrak Inc 2017 1 (404) 793 0290 | [email protected] | www.isotrak.com Isotrak 3.5 Data Transfer Selecting the Data Transfer button from the Options Screen will display the list of supported data transfer options. The ELD provides a standardized single-step compilation for the drivers ELD records and initiation of the data transfer to authorized safety officials when requested during a roadside inspection. Tap the Data Transfer button to transfer data of the compilation of the drivers ELD records. Once tapped, a selection of the supported data transfer options by the ELD will prompt to the user. Select Vehicle - this option enables the ELD to produce a data file or a series of data files of ELD records for a subset of its vehicles used by the driver. Page 31 Isotrak Inc 2017 1 (404) 793 0290 | [email protected] | www.isotrak.com Isotrak Tap the Select Vehicle menu to show the list of vehicles used by the driver. The All Vehicles option will only display on the list when the driver has already driven multiple vehicles for the day Transfer via Bluetooth - this option enables the user to transfer files through Bluetooth. The ELD prompts for an output file comment which the driver may enter (optional). After the input, if Bluetooth is not yet turned on, a prompt will appear asking you to turn it on Page 32 Isotrak Inc 2017 1 (404) 793 0290 | [email protected] | www.isotrak.com Isotrak You will then be asked to pick the device to which the data will be transmitted via Bluetooth. Transfer via Email - this option enables the user to transfer files through email. The ELD output file transferred is encrypted using AES-256 in FIPS Publication 197. Before sending, the ELD prompts for an output file comment which the driver may enter (optional). The device's default email application will then be opened before sending the email to which the data will be transferred. Transfer via USB - this option enables the user to transfer files through USB (external devices). However, prior to saving the drivers ELD file to an external storage/device, the ELD re-authenticates the driver account by asking for its password Page 33 Isotrak Inc 2017 1 (404) 793 0290 | [email protected] | www.isotrak.com Isotrak If the authentication process is successful, the driver can now select on where to save the ELD file. After selecting a data transfer option, the ELD prompts for an output file comment which the driver may enter (optional). The ELD accommodates the entry of an output file comment up to 60 characters long Upon confirmation, the ELD generates the compliant output file and performs the data transfer. 3.6 Options Selecting the Options button from the HOS Main Screen will display the Options module: Page 34 Isotrak Inc 2017 1 (404) 793 0290 | [email protected] | www.isotrak.com Isotrak The functions within the Options module will be covered in more detail throughout this document. 3.7 Logs Selecting the Logs button from the HOS Main Screen will display the current days log and provide the ability to navigate backwards to view the previous seven logs: Scroll the screen to view all of the information, or, tap the log grid to view the log events 3.8 DVIR Selecting the DVIR button from the HOS Main Screen will display the Select DVIR screen: Page 35 Isotrak Inc 2017 1 (404) 793 0290 | [email protected] | www.isotrak.com Isotrak DVIR can be created to suit the vehicle types, all DVIRs will be displayed on this screen Note: When switching the vehicles, the equipments will be displayed along with their associated forms. Changing the forms used will pop up a message dialog stating Are you sure you want to use a different form? with a Cancel or Ok button. Highlighted text only displays when conducting an inspection for the first time and that no DVIR forms are associated to the current equipment used. DVIR History can be viewed by tapping the DVIR History button in the DVIR screen. 3.9 Shift/Cycle Selecting the Shift/Cycle button from the HOS Main Screen will display the total work hours of the drivers current work shift and the total working hours that the driver can legally accumulate over a certain cycle or a consecutive multi-day period: Page 36 Isotrak Inc 2017 1 (404) 793 0290 | [email protected] | www.isotrak.com Isotrak 4 Check Driver Availability From the Hours of Service Main Screen, tap the Options button and then tap the Gain Time button, this will then display a date & time of when the driver will gain his/her maximum hours. Page 37 Isotrak Inc 2017 1 (404) 793 0290 | [email protected] | www.isotrak.com Isotrak 5 Driver Logs The Driver Logs allows you to view and update the electronic recording of your duty status events in the HOS apps online driver logs. This is where you also store shipment data, send the certified logs to its intended recipients and manage other driving duty information. Scroll the screen to view all of the information, or, tap the log grid to view the log events. The daily log for the current day will be in expanded view by default. The daily driver logs for the previous days will be in collapsed view. To expand or collapse a daily log, tap the Collapsible Menu Header Page 38 Isotrak Inc 2017 1 (404) 793 0290 | [email protected] | www.isotrak.com Isotrak Cycles and the Start Hour time used are also shown in the Log, it is found on the upper right corner just above the Grid Chart. 5.1 Using the Driver Logs Bulk/ Multiple Selection Functions The first part of the Driver Logs user interface feature controls and information for the bulk/multiple selection features. These controls will allow you to perform features for multiple selected driver logs. Function icon Function Description Selection Button Tap the button to select all certified logs Selected Logs Counter This shows the number of selected certified driver logs Reset Button This clears/deselects all of the selected driver logs 5.2 The Driver Logs Accordion Header Features To expand or collapse a daily log, tap the Driver Logs Accordion/Collapsible Menu Header: Note: Driver Logs title shows the full time range when the Start Hour time is not zero. You can change the time by going to Settings > HOS Preferences 5.2.1 Daily Drivers Log Entry Check-box (Uncertified Log) Tap the check-box to certify the selected daily log: Page 39 Isotrak Inc 2017 1 (404) 793 0290 | [email protected] | www.isotrak.com Isotrak 5.2.2 Daily Drivers Log Entry Check-box (Already Certified) Tap the check-box to uncertify the selected daily log: 5.2.3 Daily Drivers Title Log (Recertify Log) When a certified log has been edited in the portal, it prompts the driver to either accept or reject the proposed changes through the Edit Suggestions dialog. Once the driver accepts an edit request, it will display a note on the daily drivers title log stating Recertify, which indicates the log needs to be certified again in order to include the records changes. 5.2.4 Recap Tap the Recap button to bring up the recap information and corresponding cycle data for the specified duty day Page 40 Isotrak Inc 2017 1 (404) 793 0290 | [email protected] | www.isotrak.com Isotrak Tapping the Recap button will display a complete recap for the end of the workday including: - On Duty & Driving Hours, - Total hours on duty last 7 days (including current day), - Total hours available tomorrow, - Total hours On Duty last 8 days (including current day) 5.2.5 Daily Drivers Log Grid Page 41 Isotrak Inc 2017 1 (404) 793 0290 | [email protected] | www.isotrak.com Isotrak Tap the drivers log grid to view the log events and edit the log. Scroll up/down the screen to view the Daily Drivers Form; this is where you can view the other required information that must appear in the drivers daily log. In addition, not all of the events statuses are displayed on the grid chart. Personal Use and Yard Moves are also displayed on the grid chart as an Amber color line to be visually different with the other event statuses, a dashed line represents the Personal Use event and a dotted line represents the Yard Moves event. The legends for Personal Use and Yard Moves event will only display when the said events occurred. 5.2.6 Edit Daily Drivers Log Form Tap the Edit button to open the Driver Log Form, from here; you can update the other required information that must appear in the drivers daily log (as listed below) The following information can be viewed / amended within the Daily Drivers Log Grid: Driver Information Page 42 Isotrak Inc 2017 1 (404) 793 0290 | [email protected] | www.isotrak.com Isotrak a) Driver Name displays the name of the driver b) Vehicle Information Vehicle Name displays the name of the current Vehicle of the driver. Trailer Name displays the name of the current Trailer of the driver. Switch Equipment tap this button to launch the Switch Equipment dialog to select another Vehicle or Trailer names. Carrier a non-editable field which displays the Name of the Carrier. Carrier DOT Number a non-editable field which displays the Carrier DOT Number c) Shipping Information Shipping docs displays the bill of lading or manifest number entered by the driver Shipper & Commodity displays the shipper name and the type of commodity which the shipment contains 5.2.7 Shipment Details Tap the Shipments button to open the Shipment Details Form; you can fill in the shipment data that is to be included in the drivers daily log. Note: the data that can be included in this form is listed on the next page Data that can be included within the Shipment Details Form includes: Shipments on Truck Order Number the order number of the specific shipment item Weight the weight of the shipments From the point of origin of the commercial motor vehicle Page 43 Isotrak Inc 2017 1 (404) 793 0290 | [email protected] | www.isotrak.com Isotrak To the destination of the commercial motor vehicle Shipments Unloaded Today Order Number the order number of the specific shipment item Collected or Billed the preferred payment method Amount Collected the amount collected for the shipment Mailed Papers From the name of the shipment company where the shipping related documents are from 5.2.8 Miles Driven by State Page 44 Isotrak Inc 2017 1 (404) 793 0290 | [email protected] | www.isotrak.com Isotrak Tap the Miles button to open the Miles Driven Today by States dialog. This is where you can fill in the shipment data that is required to be included in the drivers daily log. Required data includes: Code State Loaded Empty Routed Number Fuel Purchased Tickets Attached 5.2.9 DVIR Page 45 Isotrak Inc 2017 1 (404) 793 0290 | [email protected] | www.isotrak.com Isotrak This is where you can view a list of the DVIRs conducted during the selected working day. Tap the icon to open the pane for the email and view options Tap the Email button to send the completed DVIR Tap the View button to view the DVIR Tap the Remove button to remove the DVIR Note: Email button will only be enabled if the DVIR Log is already certified Certified logs cannot be removed (unless uncertified) 5.2.10 Certify a Log Tap the Certify button to certify the selected daily log. If the current status is Driving, a pop up dialog will open and you will be asked to confirm changing the status to Off Duty: Tap the Certify Now button to confirm you wish to go Off Duty Tap the Cancel button to cancel changing the status Tap the Agree button to confirm certifying a daily log. Tap the Not Ready button to cancel certifying a log Page 46 Isotrak Inc 2017 1 (404) 793 0290 | [email protected] | www.isotrak.com Isotrak Tap the OK button to close the confirmation pop up dialog Tap the OK button if you wish to email the certified log to a selected recipient Select the Cancel button to close the pop up dialog without emailing the certified log Page 47 Isotrak Inc 2017 1 (404) 793 0290 | [email protected] | www.isotrak.com Isotrak If the driver did not certify all the daily logs, the ELD will prompt the driver regarding uncertified logs upon logging in and logging out to the app along with the option to certify the relevant days 5.2.11 Edit a Log Only driver logs that have not yet been certified can be edited, you will have to uncertify a driver log in order to update its contents, to do this, tap the Edit button to uncertify the selected log and reopen it for editing: Tap the Uncertify Now button to confirm uncertifying the selected log Tap the Cancel button to cancel uncertifying the selected log Page 48 Isotrak Inc 2017 1 (404) 793 0290 | [email protected] | www.isotrak.com Isotrak Tap the OK button to close the pop up dialog The Edit Log screen can update/correct the drivers or driving duty data entries logged through the app. It can also view the history of an edited log. Tap the drivers log grid to start editing it: You can navigate through the daily driver logs by selecting either back or forward arrows located above the grid Page 49 Isotrak Inc 2017 1 (404) 793 0290 | [email protected] | www.isotrak.com Isotrak Driver will be able to add a note to the following events: Intermediate log Login/logout CMV Engine power up/shut down Malfunctions and diagnostic events Create Log Event To add a new event to the selected log, tap the Add button, input the relevant details to create the event, once complete, tap the OK button to save the event. Also, the current status of the app is disabled to prevent adding the same status consecutively. Note: Refer to 3.2 Changing the Drivers Status for Personal Use Page 50 Isotrak Inc 2017 1 (404) 793 0290 | [email protected] | www.isotrak.com Isotrak Modify Log Event Tap the Edit button adjacent to any of the existing log events, make any required changes, select a reason for the edit from the drop down list and then tap the OK button to save the changes Notes: All log events that have been manually created or amended, will be displayed with an asterisk against it in the log events list depicting that it has been edited. Also scroll down to see check boxes for Personal Use, Yard Moves and Off Road. Upon editing a past event the Note field should not be empty and must contain at least 4 characters when filled out. Pending Edit Requests The Motor Carrier can request edits to the drivers logs. In the application allows the driver to review the requested edits which requires the driver to take necessary action whether the driver wants to confirm or reject the requested edits. Page 51 Isotrak Inc 2017 1 (404) 793 0290 | [email protected] | www.isotrak.com Isotrak Tap the icon beside the refresh button to display the pending edit request dialog Page 52 Isotrak Inc 2017 1 (404) 793 0290 | [email protected] | www.isotrak.com Isotrak The Pending Request dialog also appears upon certifying a log only if a driver has pending requests. Driver must accept or reject the pending request(s) first before certifying the days log. A toast message will be displayed at the bottom of app stating, "Must Accept or Reject Pending Requests Note: The events from the 'Unidentified' driver does not require acceptance. The Reject and Accept Event dialog shows the comparison of the Original status vs the changes (requested edits). Also, accepting the edits requested requires the driver to fill in the annotation field (Required) to successfully save the changes. If the driver rejects the edit suggestions then the original record remains Page 53 Isotrak Inc 2017 1 (404) 793 0290 | [email protected] | www.isotrak.com Isotrak If the driver approves the edit suggestions, the new status will replace the old status and the changes will be reflected in the events history list Auto Events The ELD automatically records the driving time when the vehicle is in motion by setting duty status to driving for the driver unless, before the vehicle is in motion, the driver has sets the duty status to off-duty and indicates personal use of CMV, in which case duty status must remain off-duty until drivers indication of the driving condition ends; Page 54 Isotrak Inc 2017 1 (404) 793 0290 | [email protected] | www.isotrak.com Isotrak Events such as Power On, Power Off, Driving and OnDuty are automatically created when connecting to a device. Auto events created were recorded and displayed on the Events history list indicated with a note Automatic Transition. (These events are also displayed in the Portal) To view all the auto created events (primary or secondary events) when connecting to a device, tap on the Show all events checkbox to enable. To hide all the secondary events, tap back on the checkbox to disable. Note: The graph-grid overlay periods of drivers indications of authorized personal use of CMV and yard moves using a different style line (such as the dashed or dotted line in amber color). Page 55 Isotrak Inc 2017 1 (404) 793 0290 | [email protected] | www.isotrak.com Isotrak A Remark will be recorded with a note Authenticate to the events history list if Driver will login to app. A Remark will be recoded with a note Unauthenticate if driver will logout from app. ELD Login will be recorded with a note ELD Connection to events history list when app successfully connected to VBUS Device. ELD Logout will be recorded with a note ELD Disconnection to events history list when driver manually disconnect to VBUS Device by tapping the connect/disconnect icon located at the App header. Page 56 Isotrak Inc 2017 1 (404) 793 0290 | [email protected] | www.isotrak.com Isotrak Crossing Boundaries The border crossing calculation uses the VBUS gps coordinates if they are available, and the android coordinates if they are not. The following instances happens when the driver crossed boundaries between Canada and US (vice versa): a. If the gps coordinates are changed to a different state or province, a remark event will be recorded in the driver log. b. If the current location is in canada, the driving rules will automatically switched to canadian rules; similarly, if the location is in the US, the driving rules automatically switched to US rules. c. If there is a co-driver logged in, both the remark and the rules changes will be occurring to be applied for him/her as well. Page 57 Isotrak Inc 2017 1 (404) 793 0290 | [email protected] | www.isotrak.com Isotrak 5.3 Malfunction and Data Diagnostic Events At Each instance when an ELD malfunction or data diagnostic event is detected or cleared by the ELD, the ELD records the event. The recorded malfunctions and data diagnostic events are inconsistencies found while monitoring the app/ELD against FMCSA compliance requirements. These instances are indicated in the application header and in the Android notification toolbar with the letters M and D, respectively. Note: ELD Data Diagnostic status affects only the authenticated user, therefore, the ELD only indicate the active data diagnostics event status applicable to the active driver. Data Diagnostic Event dialog will no longer pop up whenever it occurs hence, the Data Diagnostic D icon will be in an accent color (which based on the apps theme) when data diagnostic events occurred will only turn back to white once the dialog for the Data Diagnostic List is closed. Page 58 Isotrak Inc 2017 1 (404) 793 0290 | [email protected] | www.isotrak.com Isotrak The Malfunction and Data Diagnostic events note can also be edited on the edit log screen Tap the Clear button to clear the malfunction or data diagnostic event detected To clear all Data Diagnostic Events, tap the Clear All button. Malfunction Events Requirement No. 4.6.1.1 Event Code P / Power MF Event Name Description Power Malfunction An ELD must set a power compliance malfunction if the power data diagnostics event described in paragraph 4.6.1.1(a) of this appendix indicates an aggregated in-motion driving time understatement of 30 minutes or more on the ELD over a 24-hour period across all driver profiles, including the unidentified driver profile. Page 59 Isotrak Inc 2017 1 (404) 793 0290 | [email protected] | www.isotrak.com Isotrak 4.6.1.2 4.6.1.3 4.6.1.4 An ELD must set an engine synchronization compliance malfunction if connectivity to any of the required data sources Engine specified in section 4.3.1 of this 87 E / Sync MF Synchronization appendix is lost for more than 30 Malfunction minutes during a 24-hour period aggregated across all driver profiles, including the unidentified driver profile. The ELD must periodically crosscheck its compliance with the requirement specified in section 4.3.1.5 of this appendix with Timing respect to an accurate external T / Timing MF Malfunction UTC source and must record a timing compliance malfunction when it can no longer meet the underlying compliance requirement. ELD records requiring location information must use the last valid position measurement and include the latitude/longitude coordinates and distance traveled, in miles, since the last valid position measurement. Position L / Pos MF Malfunction An ELD must monitor elapsed time during periods when the ELD fails to acquire a valid position measurement within 5 miles of the CMVs movement. When such elapsed time exceeds a cumulative 60 minutes over a 24-hour period, the ELD must set and record a Page 60 Isotrak Inc 2017 1 (404) 793 0290 | [email protected] | www.isotrak.com Isotrak 4.6.1.5 4.6.1.7 4.6.1.8 R / DR MF S / Trans MF O / Other MF positioning compliance malfunction. An ELD must monitor its storage capacity and integrity and must detect a data recording compliance malfunction if it can no Data Recording longer record or retain required Malfunction events or retrieve recorded logs that are not otherwise catalogued remotely by the motor carrier. Data Transfer Malfunction Other Malfunction (a) An ELD must implement inservice monitoring functions to verify that the data transfer mechanism(s) described in section 4.9.1 of this appendix are continuing to function properly. An ELD must verify this functionality at least once every 7 days. These monitoring functions may be automatic or may involve manual steps for a driver. (c) After an ELD records a data transfer data diagnostic event, the ELD must increase the frequency of the monitoring function to check at least once every 24-hour period. If the ELD stays in the unconfirmed data transfer mode following the next three 90 consecutive monitoring checks, the ELD must detect a data transfer compliance malfunction. In addition to the required monitoring schemes described in sections 4.6.1.1 4.6.1.7 of this Page 61 Isotrak Inc 2017 1 (404) 793 0290 | [email protected] | www.isotrak.com Isotrak appendix, the ELD provider may implement additional, technologyspecific malfunction and data diagnostic detection schemes and may use the ELDs malfunction status indicator and data diagnostic status indicator (described in sections 4.6.2.1 and 4.6.3.1) to communicate the ELDs malfunction or non-compliant state to the operator(s) of the ELD. Data Diagnostic Events Requirement No. Event Code 4.6.1.1 1 / Pwd Diag 4.6.1.2 2 / Sync Diag Event Name Description An ELD must monitor data it receives from the engine ECM or alternative sources as allowed in sections 4.3.1.1-4.3.1.4 of this appendix, its onboard sensors, and data record history to identify instances when it may not have Power complied with the power Diagnostic requirements specified in section 4.3.1.1, in which case, the ELD must record a power data diagnostics event for the corresponding driver(s), or under the unidentified driver profile if no drivers were authenticated at the time of detection. An ELD required to establish a link to the engine ECM as described in Engine section 4.2 must monitor its Synchronization connectivity to the engine ECM Diagnostic and its ability to retrieve the vehicle parameters described Page 62 Isotrak Inc 2017 1 (404) 793 0290 | [email protected] | www.isotrak.com Isotrak 4.6.1.4 (d) 3 / Miss Diag Missing Data Elements Diagnostic 4.6.1.7 4 / Trans Diag Data Transfer Diagnostic under section 4.3.1 of this appendix and must record an engine-synchronization data diagnostics event when it no longer can acquire updated values for the ELD parameters required for records within 5 seconds of the need. If a new ELD event must be recorded at an instance when the ELD had failed to acquire a valid position measurement within the most recent elapsed 5 miles of driving, but the ELD has not yet set a positioning compliance malfunction, the ELD must record the character X in both the latitude and longitude fields, unless location is 88 entered manually by the driver, in which case it must log the character M instead. Under the circumstances listed in this paragraph, if the ELD event is due to a change in duty status for the driver, the ELD must prompt the driver to enter location manually in accordance with section 4.3.2.7 of this appendix. If the driver does not enter the location information and the vehicle is in motion, the ELD must record a missing required data element data diagnostic event for the driver. (b) If the monitoring mechanism fails to confirm proper in-service operation of the data transfer Page 63 Isotrak Inc 2017 1 (404) 793 0290 | [email protected] | www.isotrak.com Isotrak 4.6.1.6 4.6.1.8 5 / Unid Diag 6 / Other Diag Unidentified Driver Diagnostic Other Diagnostic mechanism(s), an ELD must record a data transfer data diagnostic event and enter an unconfirmed data transfer mode. (b) If more than 30 minutes of driving in a 24-hour period show unidentified driver on the ELD, the ELD must detect and record an unidentified driving records data diagnostic event and the data diagnostic indicator must be turned on for all drivers logged in to that ELD for the current 24-hour period and the following 7 days. (c) An unidentified driving records data diagnostic event can be cleared by the ELD when driving time logged under the unidentified driver profile for the current 24hour period and the previous 7 consecutive days drops to 15 minutes or less. In addition to the required monitoring schemes described in sections 4.6.1.1 4.6.1.7 of this appendix, the ELD provider may implement additional, technologyspecific malfunction and data diagnostic detection schemes and may use the ELDs malfunction status indicator and data diagnostic status indicator (described in sections 4.6.2.1 and 4.6.3.1) to communicate the ELDs malfunction or non-compliant state to the operator(s) of the ELD. Page 64 Isotrak Inc 2017 1 (404) 793 0290 | [email protected] | www.isotrak.com Isotrak Actions for Malfunction & Data Diagnostic Events Carrier responsibilities regarding malfunctions: Provide drivers with an instruction sheet describing the various ELD malfunction events and recordkeeping procedures (395.22) Provide drivers with a supply of 8 days worth of blank paper driver records (395.22) Repair, replacement, or service o Motor carrier must correct the malfunction of the ELD within 8 days of discovery of the condition or a driver's notification to the motor carrier, whichever occurs first (395.34) Record keeping responsibilities by the driver: Malfunction events o Note the ELD malfunction and provide carrier with written notice within 24hrs (395.34) o Reconstruct driving events for the current 24hr period and previous 7 consecutive days using paper logs (unless they can be retrieved from the ELD) (395.34) o Continue to manually prepare driving logs until ELD is serviced and brought back into compliance (395.34) o During inspections which take place when a malfunction has occurred: provide safety official with manually kept driver logs (395.34) Data diagnostic events o Driver must follow the motor carrier's and ELD provider's recommendations in resolving the data inconsistency (395.34) Clearing of malfunction and data diagnostic events: Page 65 Isotrak Inc 2017 1 (404) 793 0290 | [email protected] | www.isotrak.com Isotrak ELD needs to capture when a malfunction or data diagnostic event has been cleared by the driver (4.5.1.7) Unidentified driving records data diagnostic o Events that drop to 15 minutes or less during the current 24hr period and previous 7 days can be cleared automatically and there is no requirement to record the automatic clear (4.6.1.6) Page 66 Isotrak Inc 2017 1 (404) 793 0290 | [email protected] | www.isotrak.com Isotrak 5.4 DVIR The DVIR feature provides a way for you to create online vehicle DVIR reports while in the field. This helps to ensure that your vehicle confirms to the FMCSAs safety regulations. There are a number of ways to access this feature: 5.4.1 DVIR Feature Main Navigation Menu 1. Slide the screen from left to right to show the Main Navigation Menu Or 2. Tap the Main Navigation Hamburger icon to show the Main Navigation Menu Tap the DVIR option within the Main Navigation Menu 5.4.2 DVIR Feature Hours of Service Main Screen Page 67 Isotrak Inc 2017 1 (404) 793 0290 | [email protected] | www.isotrak.com Isotrak From the Hours of Service Main Screen, tap the DVIR button to display the DVIR screen When driver manually/automatically change to Driving event without completing the Pretrip DVIR, it will create a 'Remark' event with a note Pre-trip DVIR not performed. The Remark event will only be created once per shift. The Remark event will be created after it detects or when a first Driving event on the shift cycle is created. Also, an alert is sent only once for each vehicle that begins to drive without having done a Pre-Trip DVIR. Page 68 Isotrak Inc 2017 1 (404) 793 0290 | [email protected] | www.isotrak.com Isotrak 5.4.3 Selecting Your DVIR Type Choose the appropriate DVIR Type from the following options You can select a DVIR Form from the 6 default DVIR forms or you can also select a Customized DVIR Forms for Asset(s) also from the list a) Pre: A DVIR conducted before driving the CMV b) Post: A DVIR conducted after driving a CMV c) Ad Hoc: Any DVIR conducted in any other period that the ones specified in points a & b Page 69 Isotrak Inc 2017 1 (404) 793 0290 | [email protected] | www.isotrak.com Isotrak 5.4.4 Starting Your DVIR Tap the Inspect button in each equipment to start the DVIR, you will be directed to the DVIR screen. 5.4.5 Completing the First DVIR Area The first DVIR Area is selected by default; you can also tap its corresponding tab to display the DVIR items under this area. You can select the status of each DVIR Item by tapping their respective tri-state check boxes as listed below Tap the unselected check box once or select the green specify that the item has passed Tap the unselected check box twice or select the red specify that the item has failed Tap the unselected check box three times or select the NA applicable for the current DVIR Thumbs Up icon to Thumbs Down icon to icon it the item is not When failing a DVIR, an option for selecting a severity level will appear with its corresponding color: High Red , Medium Yellow , Low Green Tap the Check All button to automatically select all the DVIR items Page 70 Isotrak Inc 2017 1 (404) 793 0290 | [email protected] | www.isotrak.com Isotrak 5.4.6 Capturing an Image of a DVIR Item If you wish to capture an image of a DVIR item, you can tap the Camera Button. The Camera app will then appear, proceed to take a picture of the DVIR item. After tapping the Capture Image Button, select the Save button to save the image and add it to your item report. You can also discard the captured image by selecting the Cancel button. 5.4.7 Add a Comment or Remark to a DVIR Item You may add comments or remarks against a DVIR item by tapping the Comments button, enter the relevant comment or remark in the Enter Report field, tap the Camera button to add more images if required and select the OK button to finish adding your images and comments or remarks. Page 71 Isotrak Inc 2017 1 (404) 793 0290 | [email protected] | www.isotrak.com Isotrak If you add an image and a comment or remark to the DVIR item, the camera button will have a numbered icon over it depicting the number of images that have been attached; also, any comments or remarks that have been added will be displayed and will replace the Comments button Note: You can also tap the Voice Dictation button (speech to text) to use voice dictation instead of typing your comments or remarks. 5.4.8 Finishing / Certifying Your DVIR To finish / certify your DVIR, select the Finish tab, this will display the information detailed on the next page Page 72 Isotrak Inc 2017 1 (404) 793 0290 | [email protected] | www.isotrak.com Isotrak Summary Start Time the date and time the DVIR was started Elapsed Time the duration of the current DVIR Items Inspected this is a counter for the number of items already inspected Remaining Items This will only be displayed if you have not yet updated all of the DVIR items, this will show the item(s) that are still to be inspected. Inspection Result General Comments this is where you can enter your general DVIR report comments. One of the following options must be selected before the DVIR can be finished / certified. Defects Corrected Condition Satisfactory Page 73 Isotrak Inc 2017 1 (404) 793 0290 | [email protected] | www.isotrak.com Isotrak Condition Unsatisfactory Signature Drivers can change their signature by tapping the Change Signature button Mechanics and other inspectors can create their signatures by tapping the Change Signature button Selecting the Change Signature button will open the Create Your Signature Here screen: Tap the Done button to save your signature or tap the Clear button to discard the signature Page 74 Isotrak Inc 2017 1 (404) 793 0290 | [email protected] | www.isotrak.com Isotrak 5.4.9 Submit or Certify the DVIR Tap the Finish DVIR button to finish / certify the current vehicle DVIR. Finally, after reviewing all of the DVIR details tap the OK button to certify the DVIR. You can also cancel certifying the DVIR by tapping the Cancel button After successfully certifying the DVIR, a remark event will be created in the Edit Logs screen stating the completion of Pre/Post/Ad-Hoc DVIRs NOTE: A remark Autogenerated: Pre-trip DVIR not performed. Displayed in edit log screen when DVIR was not performed. Page 75 Isotrak Inc 2017 1 (404) 793 0290 | [email protected] | www.isotrak.com Isotrak 5.4.10 Deleting a DVIR Go to the Current DVIR section. This is where you can view a list of the DVIRs conducted within the Vehicle DVIR screen: Tap the Email button to send the completed DVIR to an intended recipient Tap the View button to view the DVIR details (once submitted, this cannot be amended) Tap the Remove button to remove the DVIR (once submitted, this cannot be removed) 5.5 DVIR History The DVIR History feature displays the DVIRs for the last 30 days for the currently selected equipment. Completed DVIRs that don't have failed items shows in a row highlighted in green color while Completed DVIRs with failed items are highlighted in red. Also, a '+' can be tap to show the details of failed items. Page 76 Isotrak Inc 2017 1 (404) 793 0290 | [email protected] | www.isotrak.com Isotrak 5.5.1 Viewing DVIR History by Vehicle DVIR Screen displays DVIR inspections for all equipment by default. Tap the Equipment name on the upper left of the screen to view the DVIR of the specified vehicle. 6 Roadside Inspection The Roadside Inspection feature provides the ability to view the driver daily logs for the past one week. It includes information on the vehicle used, shipments and driving statuses. It also has the ability to send all the logs that have already been certified to an intended recipient. There are a number of ways to access this feature: Page 77 Isotrak Inc 2017 1 (404) 793 0290 | [email protected] | www.isotrak.com Isotrak 6.1 Roadside Inspection Main Navigation Menu 1. Slide the screen from left to right to show the Main Navigation Menu Or 2. Tap the Main Navigation Hamburger icon Navigation Menu to show the Main Tap the Roadside Inspection option within the Main Navigation Menu Note: Driver that is being inspected must provide a password when exiting from the Roadside Inspection Screen. Page 78 Isotrak Inc 2017 1 (404) 793 0290 | [email protected] | www.isotrak.com Isotrak 6.2 Roadside Inspection HOS Main Menu From the Hours of Service Main Screen, tap the Roadside Inspection button 6.3 Inspection Screen Start Review From the Roadside Inspection Screen, tap the Start Review button to view the Drivers Daily Log screen Page 79 Isotrak Inc 2017 1 (404) 793 0290 | [email protected] | www.isotrak.com Isotrak Tap the Previous button to navigate to the previous log or tap the Next button to navigate to the next log 6.4 Roadside Inspection Screen Data Transfer From the Roadside Inspection Screen, tap the Data Transfer button Select an option to transfer the compilation of the drivers ELD records. Page 80 Isotrak Inc 2017 1 (404) 793 0290 | [email protected] | www.isotrak.com Isotrak 7 Switch Equipment The Switch Equipment feature allows a driver to easily switch from one vehicle to another. It also assists in monitoring and documenting the vehicles being used as part of their driver logs. There are a number of ways to access this feature: 7.1 Switch Equipment Main Navigation Menu 1. Slide the screen from left to right to show the Main Navigation Menu Or 2. Tap the Main Navigation Hamburger icon Navigation Menu to show the Main Tap the Switch Equipment option within the Main Navigation Menu Page 81 Isotrak Inc 2017 1 (404) 793 0290 | [email protected] | www.isotrak.com Isotrak 7.2 Options Menu From the Hours of Service Main Screen, tap the Options button and then tap the Switch Equipment button 7.3 Switch Equipment DVIR Screen Page 82 Isotrak Inc 2017 1 (404) 793 0290 | [email protected] | www.isotrak.com Isotrak 1. Slide the screen from left to right to show the Main Navigation Menu Or 2. Tap the Main Navigation Hamburger icon to show the Main Navigation Menu Tap the DVIR option within the Main Navigation Menu 3. Select the DVIR button from the Main Hours of Service Menu and then select the Switch button 7.4 Switching Equipment Select the Vehicle ID or Trailer ID dropdown list and select the required vehicle or trailer, then tap the Switch button to switch to the selected vehicle or trailer. After tapping the Switch button, you will be asked if you would like to perform a vehicle DVIR, tap the YES button to navigate to the Vehicle DVIR screen or tap the NO button to close the dialog box and continue. Switch equipment can be performed also in the dashboard, by tapping the vehicle/trailer icon. Page 83 Isotrak Inc 2017 1 (404) 793 0290 | [email protected] | www.isotrak.com Isotrak Vehicles and Trailers can also be filtered through text entry on the vehicle/trailer text fields. Text entry availability starts if the total number of trailers/vehicles numbers 250 or more. Switching or selecting a Vehicle with a preconfigured VBUS device enables the app to find and connect on the match device. Note: On the VBUS Settings, VBUS Data and Automatic Configuration should be enabled. 7.5 Managing Vehicles / Trailers You can add, update and delete vehicles or trailers by tapping the Manage button; this will display the Manage Vehicles/Trailers Screen The 'Manage' button is only available given a situation, that the driver is an asset admin and that the 'Manage Equipment' option (found in the Equipment Management Page) is also enabled. Otherwise, the button will not be available on the Switch Equipment dialog. Page 84 Isotrak Inc 2017 1 (404) 793 0290 | [email protected] | www.isotrak.com Isotrak 7.5.1 Manage Vehicles / Trailers Delete To delete any of the vehicles or trailers listed, tap the icon Vehicles/Trailers made in the portal can be edited or deleted can be in the HOS app and vice versa. Tap the DELETE button within the Delete Vehicle dialog to confirm deletion or, tap the CANCEL button to return without deleting Page 85 Isotrak Inc 2017 1 (404) 793 0290 | [email protected] | www.isotrak.com Isotrak 7.5.2 Manage Vehicles / Trailers - Edit To edit any of the trucks or trailers listed, tap the icon, make any required changes to the selected truck or trailer and then tap the SAVE button to save the changes or, tap the CANCEL button to return without saving. 7.5.3 Manage Vehicles / Trailers Add To add a new truck or trailer, tap the button, this will open the Add Truck dialog, enter the following details: Vehicle Name Truck or trailer name VIN Vehicle Identification Number License Plate license number Vehicle Type Vehicle or Trailer Fill in the Device Information section to pre-configure the Vehicle to a specific VBUS device. Page 86 Isotrak Inc 2017 1 (404) 793 0290 | [email protected] | www.isotrak.com Isotrak Note: The connection type defers on the VBUS Device selected Tap the ADD button to save the new truck or trailer or Tap the CANCEL button to cancel adding the new truck or trailer. When creating a new equipment the default selected device option is set to "None". Also, If the option "None" is selected, on the create/edit equipment screen, all other fields on the ELD configuration section will be hidden. Notes: When creating/modifying an equipment with a selected type of Trailer, the VIN field is disabled and enabled if the equipment type selected is Vehicle If user selects Digi WVA in connection type, then admin password field is required. Page 87 Isotrak Inc 2017 1 (404) 793 0290 | [email protected] | www.isotrak.com Isotrak In the Portal, an ability to determine on which VBUS devices will be displayed is present. Accordingly on the app, only those devices selected on the portal will be displayed in the VBUS Device menu. Once the new vehicle or trailer has been added, it will be displayed in the Manage Vehicles/Trailers screen. If the VIN is optionally populated and that the source is not the engine ECM, it will auto be converted to capital letters when saved. 8 Documents The Documents feature provides an easy way to capture, view and email documents related to hours of service activities. This includes documentation such as bill of lading, fuel receipts, accident photos etc. There are a number of ways to access this feature: Page 88 Isotrak Inc 2017 1 (404) 793 0290 | [email protected] | www.isotrak.com Isotrak 8.1 Documents Main Navigation Menu 1. Slide the screen from left to right to show the Main Navigation Menu Or 2. Tap the Main Navigation Hamburger icon Menu to show the Main Navigation 3. Select the Documents button from the Main Hours of Service Menu Page 89 Isotrak Inc 2017 1 (404) 793 0290 | [email protected] | www.isotrak.com Isotrak 8.2 Documents Options Menu From the Hours of Service Main Screen, tap the Options button and then tap the Document button Note: The Documents screen has two views; Grid View or List View Page 90 Isotrak Inc 2017 1 (404) 793 0290 | [email protected] | www.isotrak.com Isotrak 8.3 Adding Documents Tap the Add button, the camera app will open and you can then take a picture of the document or damage etc. After tapping the Capture Image button, tap the Save button to save the image and add it to your document. You can also discard the image if you are not happy with the picture by tapping the Retry button Select the type of document you wish to save by tapping the Document Type drop down list and selecting from the available options. Enter your Reference Number Add any Notes to support the image Tap the OK button to save and continue or tap the CANCEL button to return without saving Page 91 Isotrak Inc 2017 1 (404) 793 0290 | [email protected] | www.isotrak.com Isotrak 8.4 Editing / Deleting a Document Tap the Edit button adjacent to the relevant document, make any required changes. Tap the OK button to save the changes. Tap the CANCEL button to return without saving the changes Tap the DELETE button to delete the document completely Page 92 Isotrak Inc 2017 1 (404) 793 0290 | [email protected] | www.isotrak.com Isotrak 9 Add Fuel Receipts The Fuel Receipts feature provides an easy way to capture and view fuel receipts purchased related to hours of service activities. 9.1 Main Navigation Menu 1. Slide the screen from left to right to show the Main Navigation Menu or 2. Tap the Main Navigation Hamburger icon to show the Main Navigation Menu 3. Tap on the Fuel Receipts button from the Main Hours of Service Menu Page 93 Isotrak Inc 2017 1 (404) 793 0290 | [email protected] | www.isotrak.com Isotrak 9.2 Fuel Receipts Screen Note: You can change the documents view to either List View or Grid View . 9.3 Adding Fuel Receipts Page 94 Isotrak Inc 2017 1 (404) 793 0290 | [email protected] | www.isotrak.com Isotrak The camera app will then appear to take a picture of the fuel receipt. After tapping the Capture Image button, select the Check mark button to save the image and add it to your document. You can also discard the captured image by selecting the X mark button. Fill in the necessary information: Reference No. State Vehicle Fuel Type Gallons Total Cost Odometer Notes Note: Unlike adding a document (e.g Citation or Bill of Lading), additional fields will be displayed when adding a Fuel Receipts. Page 95 Isotrak Inc 2017 1 (404) 793 0290 | [email protected] | www.isotrak.com Isotrak Notes: If the state selected is in US, the odometer and volume unit display is in Mi & Gallons. If the state selected is in Canada, the odometer and volume unit display is in KM & Liters. For every Fuel Receipt created via the App Fuel Receipt feature, it creates a Remark event, found on the Edit Logs screen, with a note Purchased 1.345 gallons at $53.80 price (sample note for the above purchased). After filling in all the fields you can now tap the successfully add the document. You can also tap the cancel adding the fuel receipt. button to button to 9.4 Editing or Deleting a Fuel Receipts Page 96 Isotrak Inc 2017 1 (404) 793 0290 | [email protected] | www.isotrak.com Isotrak Tap the Edit button adjacent to the relevant fuel receipts, make any required changes. Tap the OK button to save the changes. Tap the CANCEL button to return without saving changes Tap the DELETE button to delete the fuel receipt completely Page 97 Isotrak Inc 2017 1 (404) 793 0290 | [email protected] | www.isotrak.com Isotrak 10 Co-Drivers 10.1 Logon Co-Driver From the Hours of Service Main Screen, tap the Options button and then tap the Logon Co-Driver button Personnel accounts cannot be Co-Drivers. Only authenticated users with a Driver role are allowed to log-in as Co-Driver. The Co-Driver must enter his/her Username & Password and then tap the Login button to continue, he/she will then be logged on successfully and the Hours of Service Main Screen will display their log details. Page 98 Isotrak Inc 2017 1 (404) 793 0290 | [email protected] | www.isotrak.com Isotrak In addition, the Co-Drivers name is displayed in the daily logs which is placed under the grid chart. Team Driving When in Team Driving, The Co-Driver is allowed to review his/her information by having the Access Co-Driver Logs option on the lock screen which allows them to access the HOS dashboard and subsequently select the Logs option while the vehicle is still in motion. Page 99 Isotrak Inc 2017 1 (404) 793 0290 | [email protected] | www.isotrak.com Isotrak See steps in 9.2 Switch Driver to complete process Once the Co-Driver has successfully logged in, the main dashboard is displayed with the co-drivers information while setting the app in Review Mode with limited capabilities. Page 100 Isotrak Inc 2017 1 (404) 793 0290 | [email protected] | www.isotrak.com Isotrak Review Mode When in Review Mode the Co-Driver cannot receive or access: Driving Notifications and alerts which relates to the Primary Driver Lock screen will not display even if the vehicle is in motion Cannot switch vehicle Cannot change the current event in to Driving event Cannot update any preferences related to background services When in Review Mode the Co-Driver can receive or access: Data Diagnostics and Malfunctions pop-up dialogs Pending Edit Request(s) Allow modifications on previous events Can edit current event to OnDuty ND, OffDuty & Sleeper except changing it into Driving Notes: (when the vehicle is still in motion) Attempts to change the status to Driving will only display an error stating Cannot change status while vehicle is in motion. Attempts to Accept or Reject requested driving event is not allowed in a co-drivers account, instead an error dialog is displayed stating that Only Primary Driver can switch to Driving as current status. When a Co-Driver is on the Review Mode and that the vehicle is not in motion, an option to make the co-driver to become the Primary Driver is available on the Drivers List. Once the Make Primary Driver button is tap, a confirmation dialog will display Page 101 Isotrak Inc 2017 1 (404) 793 0290 | [email protected] | www.isotrak.com Isotrak If YES is tap, the vbus services will restart under the new primary drivers account If No is tap, the dialog will close Note: The Make Primary Driver button will be disabled when the main driver is in a Driving state, which will then display a label stating Cannot Change Driver While Driving When the Primary Driver switch to the Co-Drivers account, in the Authentication dialog an option for the Make Primary Driver is available. Note: A driver that is set as the Primary Driver is the one currently using the application while the other one is only in the monitoring state. Reassign Driving Time The ELD allows the driver to reassign his driving time to a co-driver. Page 102 Isotrak Inc 2017 1 (404) 793 0290 | [email protected] | www.isotrak.com Isotrak Tap on the Edit button of the created auto driving event to display the Reassign Driving Time dialog. Select for the co-drivers name of the list. Once the OK button is tap, it will display a confirmation dialog whether to proceed to reassign the driving time event. If YES is tap, the driving event will recorded as an Inactive Changed (IC) event on the main drivers log If No is tap, the dialog will close and will not reassign the driving time. Switch to the Co-Drivers account to check the Reassign Driving Time which will be displayed on the Pending Edit Request dialog. If Accepted, the driving event will be reassigned and recorded on the co-drivers log. If Rejected, the driving event will not be recorded under the codrivers log. However, it will be displayed as an Inactive Changed Rejected (ICJ) event (both Main and Co-drivers log). Note: A Co-Driver is not allowed to accept or reject a requested Driving event. Only Primary Driver can switch to Driving as current status. Page 103 Isotrak Inc 2017 1 (404) 793 0290 | [email protected] | www.isotrak.com Isotrak 10.2 Switch Driver From the Hours of Service Main Screen, tap the Options button and then tap the Switch CoDriver button From within the Choose Driver dialog, tap the drivers name who you wish to switch to Tap the CANCEL button to return to the Options screen Page 104 Isotrak Inc 2017 1 (404) 793 0290 | [email protected] | www.isotrak.com Isotrak The HOS app then asks the codriver to input the password to authenticate the account. 11 Shipping Documents From the Hours of Service Main Screen, tap the Options button and then tap the Shipping Docs button Page 105 Isotrak Inc 2017 1 (404) 793 0290 | [email protected] | www.isotrak.com Isotrak Enter the Bill of Lading or Manifest Number Enter the Shipper or Commodity Tap the OK button to save the details Tap the CANCEL button to return without saving Page 106 Isotrak Inc 2017 1 (404) 793 0290 | [email protected] | www.isotrak.com Isotrak 12 Add Remark From the Hours of Service Main Screen, tap the Options button and then tap the Remarks button Enter the Location (optional) Enter the Remark Tap the OK button to save the remark Tap the CANCEL button to return without saving Off Road / Toll Road Feature: When Off Road is enabled it will create a Remark with a note Off Road. When uncheck it will create a Remark with a note On Road When Toll Road is enabled it will create a Remark with a note Start Toll Road. When uncheck it will create a Remark with a note End Toll Road Page 107 Isotrak Inc 2017 1 (404) 793 0290 | [email protected] | www.isotrak.com Isotrak 13 Exempt Driver If the Driver is an Exempt Driver or a driver that operates under the short-haul exemption (395.1 (e)), upon logging in or logging out a dialog will display confirming whether the driver chooses to continue as an exempt driver. By selecting the OK button, the No Logs for Non-CDL-Driver Short-Haul Drivers operating within 150 air-miles exception will be enabled. You can enable Exempt Driver through these steps: Login to Portal Go to the Drivers Management page Select on New Driver button or select the Edit driver button Enable the Exempt Driver option Page 108 Isotrak Inc 2017 1 (404) 793 0290 | [email protected] | www.isotrak.com Isotrak 14 Logout Logout message when status is still On Duty or Driving Logout message when status is Off Duty Note: Once the Logout option is tapped, the valid driver that logged into the HOS app will be logged out and the HOS app will be close completely (with no Isotrak service or VBUS service running in the background) Page 109 Isotrak Inc 2017 1 (404) 793 0290 | [email protected] | www.isotrak.com Isotrak 15 Unidentified Driving Events Unidentified Driving Events are events that are automatically recorded when a vehicle has been moving for more than 3 minutes while there is no driver logged in. These events are recorded under Unidentified Driver account. Unidentified Driving events can be accepted by actual drivers upon logging in to the app (within the Pending Request(s) window). When the next Authenticated Driver logs in or logs out, this popup will then appear. In order for the Unidentified Driving Events to be reassigned, the logged in driver will be the one to accept the Pending Edit Requests of the Unidentified Driver. Page 110 Isotrak Inc 2017 1 (404) 793 0290 | [email protected] | www.isotrak.com Isotrak 16 Warning Features Note: - Odometer field is displayed for edit request(s) made by the Personnel but it is displayed as Vehicle Miles field for edit request(s) made by the Unidentified Driver. - The Unidentified Driving Event pending edit request dialog has additional details like: From, To & Equipment ID compared to that of the Personnels pending edit request dialog. Audible and Visible Warning If the driver logged out from the app and the driver does not log onto the ELD, as soon as the vehicle is in motion, the ELD prompts a visual and audible warning reminding the driver to stop and login to the ELD. Page 111 Isotrak Inc 2017 1 (404) 793 0290 | [email protected] | www.isotrak.com Isotrak An audible alert is also available that can be heard every couple of seconds. The visible warning stays on screen which prevents the driver from using any features of the tablet except from accessing it through the driver icon on the notification bar. Location Services If the driver logged into the application without the Location Services turned on, a snackbar will display on the main dashboard and to other screens except for the screens navigated through the Settings menu. However, when the Location Services of the device is enabled then the snackbar will no longer display. Page 112 Isotrak Inc 2017 1 (404) 793 0290 | [email protected] | www.isotrak.com Isotrak Lock Screen All warnings acquired by the authenticated driver while driving, will be displayed on the lock screen and remains on screen along with a countdown (to 00:00) being displayed however the text will dim down after 15 seconds to not distract the driver. The normal text color (black or white, depending on day/night mode) will be displayed upon tapping of the screen. Page 113 Isotrak Inc 2017 1 (404) 793 0290 | [email protected] | www.isotrak.com Isotrak Note: If the driver stop driving while one of the checkbox is enabled the driver can still uncheck the Off Road or the Toll Road through the Options screen > Remarks. 17 List of Login Errors These are the different error messages that appear upon an incorrect login. Follow the steps that follow to determine the cause of the error and to mitigate the problem. Login Errors Mitigation Steps Authentication Failed. Check your network connection. Ensure that the tablet/mobile phone is connected to a data network or Wi-Fi network. Invalid user id or password. Ensure that the email address and password are correct and valid. The password should match the valid email address. A timeout error has occurred. Ensure that the tablet/mobile phone is connected to a data network or Wi-Fi network with internet access. If issue persists, try again later or contact Isotrak Support at +1 (404) 793 0290 or send an email to [email protected]. An unknown error has occurred. Contact Isotrak Support at +1 (404) 793 0290 or send an email to [email protected]. Username is required. Ensure that the username field is not empty. Password is required. Ensure that the password field is not empty. Login timed out. Ensure that the tablet/mobile phone is connected to a data network or Wi-Fi network with internet access. An error has occurred while Try logging in after a few minutes and if error persists, creating the account. If the error contact Isotrak Support at +1 (404) 793 0290 or send continues please contact Isotrak an email to [email protected]. for assistance. An error has occurred while retrieving account details. Contact Isotrak Support at +1 (404) 793 0290 or send an email to [email protected]. An error has occurred while setting up the account. Please contact Isotrak for assistance. Contact Isotrak Support at +1 (404) 793 0290 or send an email to [email protected]. Page 114 Isotrak Inc 2017 1 (404) 793 0290 | [email protected] | www.isotrak.com Isotrak Check account configuration Ensure that the driver and the asset are in the same Visibility Sets and has a role Driver role. Error creating unidentified driver account Try logging in after a few minutes and if error persists, contact Isotrak Support to +1 (404) 793 0290 or send an email to [email protected]. A non-driver accounts cannot be Ensure that the user account has a role Driver role. login as co-driver. Personnel accounts are not allowed to log in as codrivers. Your Isotrak version is. This version is no longer supported. Please upgrade to or greater for stable operation. Upgrade the Application to the latest version. Page 115 Isotrak Inc 2017 1 (404) 793 0290 | [email protected] | www.isotrak.com