User manual for "Rapid On The GO!"

Rapid Applications
Group, LLC.
ROTG Operator Manual

Rapid ERP Systems

Author: Andrew Bullis
Edit Version: 1.0
Version Date: 8/15/2015

4393 Pierson St
Wheat Ridge CO 80033

p. 303-500-3050

[email protected]
www.rapidappsinc.com

Chapters
Chapter 1: Tablet Button Functionality
Chapter 2: Opening ROTG/Logging In
Chapter 3: Receiving Job Information
Chapter 4: Job Statuses
Chapter 5: Time Entry
Chapter 6: Ticket Entry
Chapter 7: Routing Back to the Yard
Chapter 8: Viewing/Messaging
Chapter 9: Tracking DOT HOS
Chapter 10: Clocking In and Out
Introduction
This manual will cover all aspects required to use Rapid On The Go for all operators alike. The goal
of learning this manual should be to become an efficient and effective operator by using ROTG and
its features to assist you in your daily routine. In the manual we will cover all of the main
components, features, and perks of ROTG so that you can become the best operator possible. We
will show you how to optimize your tablet experience in a seamless process. Some of the key points
we will covering in this manual are as follows.









Receiving your electronic job.
Updating job statuses for the office.
Filling out your job ticket.
Sending texts and emails from Rapid On The Go.
Tracking your DOT HOS.
Routing to the job and verifying jobsite geo locations.
Clocking in and out for time cards.
Taking and saving job site images for the office.

RAPID APPLICATIONS GROUP, LLC. - FEBRUARY 2017

1

Chapter One
Tablet Button Functionality

1) Press once, opens Google Maps and shows your current location. Hold for 3 seconds, opens
google maps and route to next jobsite. If there are no pending jobs, it will route back to
base/yard.
2) Press once, opens camera, press again to take picture. Select save image and it will return to
home screen.
3) Press once, will return to ROTG home. Navigation buttons, if button is red = battery low. If
green, you have a new standard message, click to open message. If yellow = high priority
message. If all buttons are flashing colors = urgent message, click any button to open.
4) Clock in/out button, hold down for 3 seconds, give you option to clock in or out depending
on clocked status. If pressed once, will show timestamp of last status.
RAPID APPLICATIONS GROUP, LLC. - FEBRUARY 2017

2

Chapter Two
Opening ROTG/Logging In
1) Select the Rapid On The GO! application to open.
2) You must obtain your login information from your office staff, login information includes
the Username, Password, and ClientID.
3) Username.
4) Password.
5) ClientID.
6) Remember Me, to remember all information entered above.

RAPID APPLICATIONS GROUP, LLC. - FEBRUARY 2017

3

Chapter Three
Receiving Job Information
1) Once logged in, select Jobs.
2) By default you will be under Pending Jobs.
3) You will see your jobs for the day listed below. Select a job to open it up.

RAPID APPLICATIONS GROUP, LLC. - FEBRUARY 2017

4

Receiving Job Information Continued
1) Encased in red is all your job information.
2) Select the
icon to verify your current location when you are on the job for future use.
(Note: This DOES NOT verify the address you see on the left, it verifies your current
location.
3) Select the ROUTE, to route to the jobsite using Google Maps.
4) Select MESSAGE, to send a message to the office.
5) Select CAPTURE, to take a picture and attach image to the job.

RAPID APPLICATIONS GROUP, LLC. - FEBRUARY 2017

5

Chapter Four
Job Statuses
1) Once you are ready to leave the yard, select the Status tab.
2) You must first acknowledge the job before you can begin updating your job statuses.
3) Once the job is acknowledged, you can select your first status, In Route. Continue through
the rest of the status buttons based on your activity.

RAPID APPLICATIONS GROUP, LLC. - FEBRUARY 2017

6

Chapter Five
Time Entry
1) Once you have completed the job and the status is set to back at base, notice the job has
now moved from the Pending tab to the Ticketing tab.
2) Here is your job in the ticketing tab.
3) Next, select the Times tab inside of the job.
4) Notice some times fields are filled out automatically, the In Route status time stamped the
Left Yard Time
5) The On Job status time stamped the Arrived At time.
6) The Returning status time stamped the Left Job time.
7) The Back At Base status time stamped the Returned time.
8) You can also get the pre job signature here.
9) As well as a post job signature.
10) From the post job signature you can also send an email copy of the jobticket by entering an
email address.

RAPID APPLICATIONS GROUP, LLC. - FEBRUARY 2017

7

Chapter Six
Ticket Entry
1) Next, you will want to fill in your ticket information by selecting the Ticket tab. Encased in
red is all of your ticket information.
2) Notice the save option is not available yet. This is because you have required information
that is not currently entered.
3) You must tab back over to the Times screen and fill in any fields marked with a red
indicator.
4) Finish by entering your required Started At time.
5) Finish by entering your required Finished time.
6) Now you be able to go back to Step 1, the ticket to save the information. Once saved the
jobticket email will be sent to the receiver

RAPID APPLICATIONS GROUP, LLC. - FEBRUARY 2017

8

Chapter Seven
Routing Back To The Yard
1) Next, you will want to route back to the yard, unless you have another pending job, revert
back to Chapter 3 and continue the process again. Select button number 3 to bring you back
to the ROTG home screen. See Chapter 1 for reference.
2) Select the Back to Base button to choose which yard you would like to route to.
3) Then select a yard location that you would like to route to, Google maps will open with the
address of the yard.

RAPID APPLICATIONS GROUP, LLC. - FEBRUARY 2017

9

Chapter Eight
Messaging The Office
1)
2)
3)
4)

From the home screen, select Messages.
From here you will see any unread messages. Here is your message, select to open.
You can also filt

Read the full extracted text