User manual for "TRX ELD-2"

TRX ELD
User Manual

1

New Driver Sign Up (1)
-

-

Once Your Fleet has registered you as a
driver, you will receive an SMS notification with
a link to download the TRX ELD Drivers
Logbook App
Open the TRX ELD Drivers Logbook
Application on your mobile phone
Enter your registered mobile number and US

TRX ELD

DOT number and Tap Continue

2

New Driver Sign Up (2)
-

-

-

-

You will receive an SMS
message with the your TRX
ELD verification code
Enter the 4-Digit Verification
PIN on the new screen, create
and confirm your 5-Digit Login
PIN
Tap Set PIN
Once the PIN Reset
confirmation message occurs,
tap Continue
TRX ELD will synchronize and
set up your data on your
phone

3

Existing Driver Login (1)
-

As an existing Driver, open the TRX ELD
Drivers Logbook App on your phone
Enter your registered mobile number, US
DOT and tap Continue

4

Existing Driver Login (2)
-

Enter your 5-Digit PIN and Tap Login
TRX ELD will synchronize and setup your
logbook data on your phone

5

Logbook Home Screen
-

-

Once signup is complete and data has been
synched, your will see the TRX ELD Drivers
Logbook Home Screen
At the top, it shows your name and ELD
Connection Status
Below this, you can find your current Duty
Status, a tile with your current HOS information
The section underneath shows todays Logbook
graph
At the bottom, you can find the navigation menu

6

Install ELD Device in Your Vehicle
-

If needed, order additional TRX ELD devices on www.TRXtechno.com or call +1 (650)-600-0008
Plug it into the diagnostic port of your Vehicle (use complementary TRX PIN adaptor for different
connector types)
Power and Network Connection lights will be ON if device is properly installed

7

Connect to Vehicle ELD (1)
-

-

-

On the Logbook Home Screen, tap
the Connection Status icon
Select the vehicle you are
connecting to and any Co-Driver if
applicable
The TRX ELD App will search for
nearby ELD devices
If unable to locate the desired
device, please try again

8

Connect to Vehicle ELD (2)
-

-

-

Select the correct Vehicle from the
list of available Devices by tapping
Connect
The TRX ELD App will Connect to
the device
Once successfully connected, the
connection section on your
Logbook Home Screen will turn
green and list the connected
vehicle
If Connection fails, please try again

9

Connect to Vehicle ELD (3)
-

If the newly connected Vehicle VIN number
differs from the Vehicle previously assigned to
you, we will update the App and let you know

-

Please check to ensure you are connected to
and driving the correct vehicle

10

Driving with ELD
-

-

Start driving your Vehicle with ELD
connected
Your Duty Status will automatically change
to Driving when speed is more than 5
MPH
When the Vehicle is stopped for more than 3
minutes, the driving status will automatically
switch back to On Duty

11

Switch Duty Status
-

Tap on tile with your Duty Status
A menu will open with your current
Duty Status highlighted
Tap on the available Duty Status
you would like to switch to
Add an optional comment or select
a standard note and tap Update
Your Status tile will now be
updated to the new status

12

Disconnect When Done
-

-

On the Logbook Home Screen, tap
on the tile with your ELD
connection Status
Tap Disconnect
When successfully disconnected,
your Status tile will switch to red
and state Disconnected

13

ELD Connection Failure
-

-

-

If the Truck has been
disconnected, the Vehicle
Connection tile will be red and
state Disconnected
To check, click on the tile: if not
connected, the App will search for
available Devices
Reconnect to the correct ELD
device

14

ELD Malfunction & Diagnostics
-

-

Once an ELD Malfunction or Diagnostic Event is
detected you will receive an event Push-Notification
and the Red Event icon will be visible at the top of
each screen
Clicking on the icon/notification will open a screen
with a list of all active events
Click on the Notification to Complete Required
resolution steps: Generally, notify your Fleet, review
your logs and manually enter missing data

ELD Diagnostic Event Detected

15

Unassigned Drive Time
-

-

If we detect an Unassign Drive Time event that
is likely associated with your account, you will
receive a notification
You can either Reject it with and explanation, or
Accept it and your Logs will be updated

16

HOS Violations and
Notications
-

-

In case of an HOS violation, you will receive a
push notification
On the Logbook Home Screen, you will see the
Violation icon on the associated Log Graph
where time under violation will be marked in red
Click on the Log graph and you will see further
details about the violation

17

Complete Daily Logbook Information
-

-

-

Tap on Logbook on the bottom
menu in order to open your Daily
Log Page
Review your logbook entries
You can click on the edit icon to
edit your logs in accordance with
FMCSA rules
Navigate the tabs at the top of the
page to access and edit your your
Truck and Trip Docs, access the
DVIR Workflow and Sign the Days
Logs

18

Sign Driver Logbook Daily
-

-

-

In order to sign your daily logs, tap
the Sign Button on the logbook
graph of daily logs that are missing
your signature
Alternatively, you can tap the Sign
tab on the Logbook page
Using your finger, draw your
signature in the entry field and tap
Save
Once signed, the Sign button on the
respective logbook graph will turn to
Signed

19

Accept/Reject Log Edits
-

-

When your Fleet Manager makes any changes
to your Logs in accordance with FMCSA Rules,
you will receive a notification once exiting
Driving Mode
Review the suggested change in detail
Accept: Tab Accept and your logs will be
updated accordingly with an edit annotation
Reject: Tab Reject and provide a explanation
of why the suggested change is incorrect. There
will be no change to your Logs

20

Roadside Inspection
-

Tap on More in the bottom navigation bar
Then, tap on the first tile called DOT
Inspection and follow the instructions
Tap Start to begin Inspection and h

Read the full extracted text