User manual for "Konnect Shift ELD"

KonnectShift Driver App
User Manual

Table of Contents
1 Starting
Your Shift

Ensure to carry ELD Materials
Login & Select Vehicle and Trailer
Review Uncertified Logs
Add Pre-Trip DVIR (if applicable)
Change Duty Status (if applicable)
Start Driving

2 During
the Shift

Take a Break
Update your duty status
DOT Inspection
Transfer Logs

3 Ending
Your Shift

Add Post-Trip DVIR (if applicable)
Edit Your HOS Log (if required)
Certify Your Logs
Go Off Duty & Sign Out

4 Extra Duty
Status

5 Alert

Yard Move
Personal Use
Unassigned Vehicle Driving
Malfunction

1. Starting Your Shift
Ensure to carry ELD Materials
You are required to carry ELD materials all the time
to be in compliant with the ELD mandate. So make
sure you have them in your vehicle or on you.
ELD materials includes :
User Manual of KonnectShift Driver App
KonnectShift DOT Instruction Sheet

Login & Select Vehicle and Trailer
1. Download and open the KonnectShift Driver App.
(You can download the app from the app store for IOS
or play store for Android)

2. Enter your login details and click on Login.

3. Select your vehicle from the list

Review Uncertified Logs
Uncertfied logs alerts will appear upon sign in and sign
out if you forget to certify your logs.

To review uncertified logs, select Review and Certify.

Add Pre-Trip DVIR (if applicable)
If driver vehicle inspection reports (DVIRs) are
applicable for your vehicle, add a new pre-trip
inspection report:
1. From the DVIR view, review any existing DVIRs
for this vehicle.

2. To create a new report, click +.

3. If you are presently Off Duty, you will be
prompted to go On Duty (not driving) before
beginning your DVIR.

4. Select Pre-Trip then tap Add or Remove Defects
and review each item on the list against
your vehicle.

5. If defects are found, select the applicable defects and
enter a description and optional photo. Tap Done to
save. If Trailer is applicable, repeat step 4 for trailer.

6. Select Safe to drive or Unsafe to Drive.
To certify, click onSign and Submit

Change Duty Status (if applicable) &
Start Driving
Once youve completed all of the pre-trip tasks in this
section, youre ready to drive.
When the vehicle begins moving, your duty status will
automatically switch to Driving, in accordance with
the ELD mandate or change your duty status to Driving
from HOS section.

2. During the Shift
Take a Break
When the vehicle has stopped moving for 5 minutes,
your duty status will automatically be set to On Duty
(not driving). When its time for a break, you can change
your status to Off Duty. If you will use your vehicles
sleeper berth, you can set your driving status to the
Sleeper Berth option.
From the Main menu view, tap Current Status.

Update Your Duty Status
From the Main menu view, tap Current status.

DOT Inspection
During an inspection, present your electronic logging
device and the KonnectShift DOT Instruction Sheet to the
Inspection official.
From the Hours of Service view, tap Inspection.

Transfer Logs
1. From DOT Inspection screen, tap Transfer Logs.

2. Select Wireless Web Services or Email.

3. Ending Your Shift
Add Post-Trip DVIR (if applicable)
If driver vehicle inspection reports (DVIRs) are appropriate
for your vehicle, add a post-trip inspection report:
1. From the DVIR view, To create a new report, click on +.
2. If any defect found, click on Add or Remove Defects
and review each item on the list against
your vehicle.
3. Set the DVIR type to Post-Trip.
4. Complete and certify the DVIR.

Edit Your HOS Log (if appropriate)
Per the ELD mandate, you cannot edit start or end times
for Driving status. To make other log edits, see below.

Edit the Start Time, End Time, and Duty Status.

Certify Your Logs
1. From the Hours of Service view, select date

2. Tap Certify and Submit.

3. Read the certification statement, sign
Agree and Submit.

Go Off Duty & Sign Out
Once youve completed all of the post-trip tasks in this
section, youre ready to end your shift on the app. You
must both go Off Duty and Sign Out from the KonnectShift
Driver app to end your shift.

Set Off Duty Status
1. Follow previous instructions to access the duty
status change menu. Set your status to Off Duty
2. Tap Save after optionally entering a note
or location.
Dont forget to go Off Duty
:
If you logout without entering shift information, you will
remain On Duty. If you have already certified your log,
your carrier administrator must be contacted to update
your log.

Sign Out
1. Return to the Home screen if it is not
already displayed.
2. Tap the Sign Out button at the bottom of the screen.

Dont forget to Sign Out
If you remain logged in on a vehicle, even when Off
Duty, driving time accumulated by another driver on
that vehicle could be applied to your driving record.

4. Extra Duty Status
Yard Move
This duty status may be available for selection if
applicable. When this status is selected before
driving, your duty status will not be automatically set to
Driving. To set this duty status:
1. Follow previous instructions to access the duty
status change menu. Set your status to Yard Move.

2. Enter a note to describe the situation (required).
3. Tap Save.

Personal Use
This duty status may be available for selection if
applicable. When this status is selected before
driving, your duty status will not be automatically set to
Driving. To set this duty status:
1. Follow previous instructions to access the duty
status change menu. Set your status to
Personal Use.

2. Enter a note to describe the situation (required).
3. Tap Save.

5. Alerts
Unassigned Vehicle Driving
Unassigned vehicle driving alerts will appear if
your vehicle has unassigned hours.
After sign in, you can use the app to
claim these unassigned hours.
Review unassigned hour notification.

Malfunction
Diagnostic and malfunction errors are displayed on the
Hours of Service screen.
From the Hours of Service view, tap D (diagnostic) or
M (malfunction) to view error source. Review all log
dates listed. Cer

Read the full extracted text