User manual for "Ingtech Delta"

QUICK
REFERENCE
GUIDE

INGTECHDELTA  Quick Reference Guide rev_B

Disclaimer

INGTECH inc. assumes no responsibility for errors or omissions to the content herein.

INGTECH inc. shall not be liable for any direct, indirect, consequential, incidental
damages or any damages whatsoever in connection with the use or performance of the
INGTECHDELTA application and related products.

INGTECH inc. reserves the right to make additions, deletions, or modification to the
contents herein at any time without prior notice.

January 2018

INGTECH DELTA  QRG rev_B

2

Outline
Introduction
Knowing your Electronic Logging Device (ELD)
Turning on the tablet
Accessing the INGTECHDelta application
Information displayed on the logging screen
Logging into the application INGTECHDelta
Connection to a Bluetooth module
Identification (Carrier, Home Terminal, Vehicle number)

Hours Of Service (HOS)
INGTECHDelta hours of service main page
Vehicle(s) identification/change
Driving cycles selection/change (Canadian or American)
Driver Status change
Inspection mode (road side inspection)
View, Modify and Certify daily logs

Malfunctions

January 2018

INGTECH DELTA  QRG rev_B

3

Introduction
Knowing your Electronic Logging Device (ELD)
1. Power button

2. Not used

3. Return button

4. Not used

5. Home button

2

1
3

4

5

January 2018

INGTECH DELTA  QRG rev_B

4

Introduction
Turning on the tablet


Press and hold the  Power button  for 3 seconds in order to turn on the tablet.

Accessing the INGTECHDelta application through the home page





The home page is accessed via the  Home button  or if the INGTECHDelta app is not powered
automatically after the tablets power up sequence;
Tapping on the icon labelled  INGTECH DELTA  [1] launches the INGTECHDelta app;
Tapping on the icon labelled  SETTINGS  [2] allows the screen brightness adjustment;
A phone number is provided for direct support at the bottom of the page.

1

January 2018

2

INGTECH DELTA  QRG rev_B

5

Introduction
Information displayed on the logging screen
1. Connectivity (WI-FI or Cell.)
4. Last connected user

2. Battery state of charge
5. Software version installed

3. Time (actual)
6. Language selection (FR  EN)
1

2
3

4

6

5

January 2018

INGTECH DELTA  QRG rev_B

6

Introduction
Logging into the application INGTECHDelta





If you are the last user, press the gold button  Last connected user  [1] if not press on  Change driver 
[2] to identify yourself;
Pressing [2] forces you to identify yourself through the verification of your credentials ( Username  [3]
and  Password  [4]);
Pressing [1] allows for a quicker access by simply asking for your  Password  [4];
Finally, press  Authenticate  [5] to proceed.

3
4

1

5
2

January 2018

INGTECH DELTA  QRG rev_B

7

Introduction
Connection to a Bluetooth module





To connect to a previously paired device/vehicle, press on  Previous device  [1];
To connect to another device/vehicle, press on  New pairing  [2];
It is possible to skip this process by clicking on  Skip  [4];
Pressing  Logout  [3] to return to the login prompt.

1
2
3

January 2018

4

INGTECH DELTA  QRG rev_B

8

Introduction
Identification (Carrier, Home Terminal, Vehicle number)


The driver must ensure that all fields are filled and that the information is accurate. The page  Vehicle
identification  has fields that are automatically filled (Carrier [1], Vehicle number [3], VIN [4]) and others
that require the drivers input;

IMPORTANT: The driver is responsible to ensure that the information is accurate and must be modified
accordingly


Once the information is accurate, press  Confirm  [7] to proceed.

1
2
3
4
5
6
7

January 2018

INGTECH DELTA  QRG rev_B

9

Hours Of Service (HOS)
INGTECHDelta hours of service (HOS) main page
1. User identification
4. Driving cycle
7. Inspection (road side)
10. Logs

2. Energy gauge
5. Drivers status
8. Details (not active)

3. Vehicle identification
6. Notifications (not active)
9. Log out

1

2

3

4

5

8

7

10

9
January 2018

6

INGTECH DELTA  QRG rev_B

10

Hours Of Service (HOS)
Vehicle(s) identification / change




This display refers to the information gathered and confirmed during the logging process explained on
page 9;
Pressing anywhere on this section, while the vehicle is not in motion allows the driver to edit any of the
proposed fields;
Press  Save  to accept the changes or  Cancel  to return to the HOS main page.

January 2018

INGTECH DELTA  QRG rev_B

11

Hours Of Service (HOS)
Driving cycles selection / change (Canadian or American)



The selection of a driving cycle can be made by tapping anywhere within the section  Cycle(s)  [1];
Selecting a cycle changes the calculations driving the Working hours left [2] indicator.

1

2

January 2018

INGTECH DELTA  QRG rev_B

12

Hours Of Service (HOS)
Driver Status change





Other than the automatic changes to the drivers status, done by the application, the driver can manually
change is status by clicking on the Driver Status button [1];
The following status are available:
 OFF DUTY - OFF [2], SLEEPER BERTH - SB [3], DRIVING - D [4] and ON DUTY NOT DRIVING - ON [5];
Once the selection is made, a  Comment  [6] can be added by the driver for additional information;
Press  Save  [7] to save and proceed with this selection.

2

4

3
1

5

6
7

January 2018

INGTECH DELTA  QRG rev_B

13

Hours Of Service (HOS)
Inspection mode (roadside inspection)


Tap on  Inspection  [1] to go to the roadside inspection
mode:


2

The icons labelled  Previous  [2] and  Next  [3] can be used
to navigate between each daily logs;
The option  Anonymous records  [4] allows to show all the
unidentified driving activities for the driven vehicle(s);
The information shown on the header section above the grid
must be verified by the driver and modified if need be;
The line  Comment  [5] is provided to the driver to add the
output file comment following the agents instructions;
The inspection report can be sent by email   Send by email 
[6] or

Read the full extracted text