User manual for "Produce Pro Software DriverHOS"

Below you will find the vendor-provided user manual for the ELD product "Produce Pro Software DriverHOS".

For vendor contact details and additional devices from the same company, see their page Produce Pro, Inc..

Manual text preview

DriverHOS User Manual for ELD

FMCSA REGULATIONS REQUIRE THIS MANUAL REMAIN IN VEHICLE AT ALL TIMES.

Certificate of Compliance

The Produce Pro DriverHOS solution is listed on the FMCSA web site of approved ELD
solutions:
https://csa.fmcsa.dot.gov/ELD/List

Table of Contents

Before you Drive
Installing the BlueLink..4
Download the App5
Login ..6
Pre-trip Information ..9
Using Hours of Service
Getting Started....11
On the Road....14
Day View.....16
Changing Past Status..................17
Status Graph...19
Action Buttons...................21
Driver Issues.....................25
Table of Events...26
Change Request.27
Additional Tools
Law Enforcement Export Options28
Diagnostic and Malfunctions Notification..................31
Additional Information and Email Report.......32

Installing the BlueLink
1. Locate the port in your vehicle, with the engine off. It is generally located under
the left side of the dashboard, below the driver seat, near the left kick panel or
under the steering wheel.
2. Attach the cable to the port, which can look like one the following:

3. Attach the other end of the cable to the BlueLink device.
4. The indicator lights on the BlueLink will show if the connection is complete.
5. Mount the BlueLink in your vehicle.

Download the App
1. Search for the app in the Google Play store for Android phones.
2. Click on install to download the app.

2. Choose the BlueLink associated with your truck and press accept.

3. When the BlueLink connection confirmation screen appears, tap accept.

Pre-trip Information
1. The logging information screen will come up, showing the header information for
the current day.

Review the data and if everything is correct, tap the SAVE button in the upper right
corner to set your information for the day.

If the data is not correct and needs to be changed, tap on the down arrow by the
Select Data option. Select the manual entry option, this will allow you to change the
information on the header page. Once your manual modifications are complete, tap the
save button in the upper right corner to set your information for the day.

2. You will now see the main Driver app screen shown any trips assigned to you.

The HOS (hours of service) information bar is at the top of the screen. At the far left is
the driver status (OFF), time before you have to take a break, driving hours remaining,
on duty hours remaining, hours in your cycle, and then hours available for tomorrow
once the first day of your cycle drops off. The two circles to the top far right are for
diagnostic and malfunction indications. The diagnostic circle will turn yellow and the
malfunction circle will turn red if there is an issue.
630.395.9600 | producepro.com | Chicago | Los Angeles | Philadelphia | Austin
10

Getting Started
1. Tap on the triple lines icon
in the upper left
corner. This will bring up the hours of service
menu. You can also swipe to the right to bring up
the menu. Tap Duty Status.

2. The duty status will bring up a list of status options at the bottom of the screen.
This is where you can change your status from off duty to on duty. This screen
also shows information on the cycle you are following, hours remaining,
violations, and any malfunctions.

3. Tap on the On Duty button to get your day started. The top left shows a status
of On now. The arrow to the left of Duty status will take you back to the driver
application at any time. There are also options for Yard move and Personal
use if you system has been configured to allow these two special duty statuses.

On the Road
1. When the truck goes in motion, the input mode is automatically disabled, per
regulations. The driver status is automatically changed to driving as shown in
the upper left corner, by the D. A vehicle speed of 5 miles per hour or more will
trigger the input being disabled. When you are stationary you can select on
duty to make your delivery. The status will automatically change after 6 minutes
to on duty if you forget and the vehicle remains stopped.

2. When the truck is stopped, swipe to the right to bring back the hours of service
menu. If you press set info it will take you back to the login screen. Press day
view to get to the current day information.

Day View
1. The day view will show the driver profile. You can have multiple drivers logged
into the same device. If you tap the down arrow by the driver profile, a drop
down will list the drivers to choose from. There can also be an unidentified driver
listed if the device detected the truck in motion without a driver logged in.

2. If you touch the arrows to the left and right of the date, it will move you to
different days in your cycle.
3. If you tap on the date it will bring up a calend

Read the full extracted text