User manual for "Omnitracs One with Active Mobile Gateway with Communications"

Below you will find the vendor provided user manual for the ELD product "Omnitracs One with Active Mobile Gateway with Communications".

For contact information and additional devices produced by the same vendor see their page Omnitracs, LLC.

OMNITRACS ONE
ACTIVE MOBILE GATEWAY with
COMMUNICATION (AMG-C) with DRIVE ELD
DRIVER GUIDE
Android Operating System
Compatible with Android 7.0 or greater mobile devices
ELD ID: AMG002

80-JE038-1 Rev. A
December 2019

Omnitracs, LLC
717 N. Harwood Street, Suite 1300
Dallas, TX 75201 U.S.A.
Copyright 2019 Omnitracs, LLC. All rights reserved.
Omnitracs is a trademark of Omnitracs, LLC. All other trademarks are the property of their respective owners.
Omnitracs endeavors to ensure that the information in this document is correct and fairly stated, but Omnitracs is
not liable for any errors or omissions. Published information may not be up to date, and it is important to confirm
current status with Omnitracs.
This technical data may be subject to U.S. and international export, re-export or transfer (export) laws. Diversion
contrary to U.S. and international law is strictly prohibited.
Specifications subject to change without notice.
80-JE038-1 Rev. A
December 2019

ELD Driver Guide Rev C
MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION

Contents

Overview ............................................................................................................................................................................................ 4
Log In and Associate Omnitracs Drive to a Vehicle ................................................................................................................... 5
Log Out of Omnitracs Drive ............................................................................................................................................................ 7
Omnitracs Drive Dashboard ........................................................................................................................................................... 9
Hours of Service (HOS) Functions ................................................................................................................................................... 9
Change Duty Status...................................................................................................................................................................... 9
Change Duty Status Personal Conveyance (Configurable by Motor Carrier) ....................................................... 10
Change Duty Status Yard Move (Configurable by Motor Carrier) ......................................................................... 11
Driver HOS Log Overview ............................................................................................................................................................ 12
Viewing Your Driver Logs ......................................................................................................................................................... 12
Editing Your Driver Log ............................................................................................................................................................. 15
Reviewing Motor Carrier Edits ................................................................................................................................................. 17
Certifying Logs ............................................................................................................................................................................ 19
Unassigned Vehicle Activity ...................................................................................................................................................... 21
Diagnostic and Malfunction Alerts ............................................................................................................................................... 21
Paper Log Mode ............................................................................................................................................................................. 22
Sending ERODS when Requested by Law Enforcement .......................................................................................................... 23
Log In / Out a Co-Driver Using Omnitracs Drive ..................................................................................................................... 26
Adding a Trailer Using Omnitracs Drive .................................................................................................................................... 28
Entering Shipping/Manifest Information Using Omnitracs Drive ........................................................................................... 29
Omnitracs Drive with AMG-C ELD Driver Cab Card ............................................................................................................... 31

Overview

Omnitracs One Drive will run on whitelisted Android-based devices, including both phones and tablets, and
is compatible with Android 7.0 or greater mobile devices.
Omnitracs One Drive uses the Bluetooth capability of a mobile device to connect to an AMG-C and obtain
engine data automatically. The small, easily installed in-cab AMG-C taps into the trucks computer.
Data is transferred from the AMG-C via Bluetooth to the drivers smartphone, tablet, computer, or rugged
device. The data is then transferred via hotspot from the AMG-C to the Omnitracs One Host website for
data collection and analysis.
The result is an easy-to-use dashboard of compliance and fleet optimization data and scorecards.
Drivers can use Omnitracs Drive to view and update Hours of Service (HOS) logs, record Driver Vehicle
Inspection results, begin and end routes and stops, and perform a variety of other tasks. The information
automatically collected from the AMG-C, in addition to any information provided by the driver, is sent to
the Omnitracs One Host website using the AMG-Cs hotspot which offers a secure carrier network.

ELD Driver Guide Rev A
MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION

To associate Omnitracs Drive to a vehicle (using a WIFI-only or non-cellular mobile device), select the
Omnitracs Drive icon from your available applications. The Omnitracs Drive login screen appears. The
mobile device being used must be within Bluetooth range of the AMG-C for discovery.

You are
prompted to
confirm your
understanding
regarding the
safe operation
of the vehicle.
Select OK

Enter your
Driver ID (case
sensitive) and
password, then
select Sign In.

You are
prompted to
connect to a
new vehicle.
Tap Connect to
New Vehicle
and select the
vehicle you wish
to associate the
Omnitracs One
Drive with. If
the desired
vehicle does not
appear, select
Rescan.

ELD Driver Guide Rev A
MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION

After you have associated the Omnitracs Drive to

the desired vehicle, you will be prompted to
confirm if you want to switch your duty status to
On-Duty. If you select No, you will be logged into
the Omnitracs Drive in an Off-Duty duty status.
Either way, you will be directed to the Omnitracs
Drive Dashboard.

Note: To associate Omnitracs Drive to a vehicle (using a cellular enable mobile device), select the Omnitracs
Drive icon from your available applications. Omnitracs Drive login screen appears. The mobile device being
used must be within Bluetooth range of the AMG-C for discovery.
Select Compliance from the Omnitracs Drive fly-out menu. Select the Connect to Vehicle option and choose
the correct vehicle to be associated with Omnitracs Drive.

ELD Driver Guide Rev A
MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION

Log Out of Omnitracs Drive

When you log out of Omnitracs Drive, Omnitracs One automatically records inspection and logout
information and makes it available through the Omnitracs One Host web user account.
To log out, select the hamburger menu button in the upper left corner of the Omnitracs Drive Dashboard,
then select Sign Out from the fly-out menu.

ELD Driver Guide Rev A
MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION

The Logout screen appears, asking you to confirm that you
want to log out. Select Yes.

If you are
still On
Duty, you
are prompted to go Off Duty. It is recommended that you
always go Off Duty when you log out. If you select No,
you will remain On Duty even though you are no longer
logged in.

ELD Driver Guide Rev A
MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION

Omnitracs Drive Dashboard
The Omnitracs Drive Hours of Service (HOS) screen provides real-time driver information such as
HOS Time to Violation Clocks, current duty status with ability to change and driver log options.
To access Omnitracs Drive HOS screen, tap the time clock indicator in the title bar.

Hours of Service (HOS) Functions

The HOS function of Omnitracs One monitors On Duty not Driving, Off Duty, Sleeper Berth, and Drive time.

Change Duty Status

You can adjust your duty status on the Omnitracs Drive HOS screen by touching the current duty status
displayed. The HOS function features automatic duty status change when the vehicle is in motion. When
Omnitracs Drive is associated with a vehicle and an authenticated driver is logged in, the current duty
status will automatically switch to Drive (unless the driver has selected, if made available, Yard Move or
Personal Conveyance) when the vehicles motion reaches a configurable speed not to exceed 5mph.
Omnitracs Drive HOS screen displays your current duty status and time to violation clocks, as well as any
potential violations currently applied to the driver status.
ELD Driver Guide Rev A
MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION

Once you are logged in, you can adjust your duty status manually:
1. Select the current duty status to display the duty status options
available.
2. Select one of the following to change the current HOS status:
o Off Duty - Off Duty
o Sleeper - Sleeper Berth (available only if vehicle is
configured for sleeper berth
o On Duty Not Driving - On Duty
Depending on your companys configuration settings, you may see options
for Personal Conveyance or Yard Move when you change your duty status
to On Duty (Yard Move) or Off Duty (Personal Conveyance). When
configured these options are available only when the vehicle is powered on.

Change Duty Status Personal Conveyance (Configurable by Motor
Carrier)

The Personal Conveyance special duty status category can be declared to allow off-duty drivers to use a
commercial motor vehicle (CMV) when they are off-duty. A driver may record time operating a CMV for
personal conveyance as off-duty only when the driver is relieved from work and all responsibility from
performing work for the motor carrier. Your Omnitracs Drive must be configured to allow Personal
Conveyance for this option to be available.
To declare Personal Conveyance, you must be Off Duty and must be associated to a vehicle.
1. In Omnitracs Drive HOS screen, select the current duty status.
2. Select Off Duty from the status options listed. A dialogue box will
pop-up.
3. Select the Personal Conveyance option and enter a comment (460
characters) to explain your use of PC and select CONTINUE. You
return to the Omnitracs Drive HOS screen, which indicates that your
duty status has been updated.

ELD Driver Guide Rev A
MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION

Note: If you exceed the daily maximum Personal Conveyance distance configurable by your company,
the Omnitracs Drive screen issues a warning message; however, the duty status will remain Personal
Conveyance until the driver manually transitions
to another duty status. Additionally, Personal
Conveyance will continue throughout a complete
engine power-cycle. After the engine is
repowered, a message will prompt the driver
for continued a Personal Conveyance duty
status. If there is no response from the driver
and the Omnitracs One Device senses vehicle
motion, the Drive duty status will be
automatically selected.

Change Duty Status Yard Move (Configurable by Motor Carrier)

On-duty drivers can declare a Yard Move special duty status category when they need to move trucks and
trailers in a non-road space, such as the yard of a manufacturing facility, warehouse, or distribution center.
Your Omnitracs Drive must be configured to enable Yard Move for this option to be available.
In order to declare Yard Move, the driver must be On Duty and associated to a vehicle.
1. In Omnitracs Drive HOS screen, select the current duty status.
2. Select On Duty Not Driving from the status options listed. A
dialogue box will pop-up.
3. Select Yard Move option and enter a comment (460 characters)
to explain your use of PC and select CONTINUE. You return to
Omnitracs Drive HOS screen, which indicates that your duty status
has been updated.

ELD Driver Guide Rev A
MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION

Driver HOS Log Overview
Viewing Your Driver Logs

You can use the ELD Activities menu of Omnitracs Drive HOS screen to access Driver Logs, Edit Log and
Work Time Extension.

When you select View Logs, you will be redirected to the Drivers Daily Log screen within the compliance
application. It is important to know how to display this screen when law enforcement personnel
request access to the HOS log or in the event of a roadside inspection.
The HOS Log screen has four different tabs: Log, Header, Certify, and
Unidentified.
All four tabs display eight days worth of logsthe current day plus the
previous seven days. Use the right and left arrow buttons to move
backward and forward through the viewable days.
Below is a high-level overview of each tab. We will discuss log
certification on unidentified driver profiles in more detail later in this
guide.

ELD Driver Guide Rev A
MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION

The HOS Log tab displays the
log graph and all log events
for the given day.

This tab includes an Inspection
Mode option. Switch
Inspection Mode to On to
display detailed information
about ELD-only events.
IMPORTANT: You must
present the Inspection Mode
screen to law enforcement
personnel.

The Header tab displays
detailed information about the
driver, carrier, vehicle, trailer,
and other data related to log
events.

ELD Driver Guide Rev A
MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION

The Certify tab enables
drivers to certify their HOS
logs, which is required by the
ELD Mandate at least once per
24-hour period. The tab
displays all log events for a
given day. Simply select the
Certify button to certify your
log for that day.
If you need to certify logs for
more than one day, select the
right or left arrow buttons on
either side of the header to
move to the next or previous
days log. When you have
certified all logs, the red
indicator next to the Certify
tab label disappears.
The Unidentified tab displays details about any rejected
unassigned vehicle driving activity that was recorded on
the associated vehicle in the past 7 days or the current
day. This tab is more clearly identified as the Unidentified
Driver Profile. This tab is intended for use by law
enforcement officers when they review driver logs during
an inspection.
The activities (if any) displayed in the Unidentified Driver
Profile are related to the vehicle the Omnitracs Drive is
associated with. Activities with an Inactive Record Status
have been accepted by an authenticated driver (may not
be you). Those with an Active Record Status remain
unassigned.

ELD Driver Guide Rev A
MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION

A blank Unidentified tab means there are no unidentified
vehicle movements assigned to the Unidentified Driver
Profile for that day.

Editing Your Driver Log

Drivers using Omnitracs Drive can add and edit On-Duty, Sleeper Berth, and Off-Duty time directly from
their Omnitracs One Mobile Devices. They are also required to review, accept, or reject edits made by the
motor carrier upon logging into Omnitracs Drive.
You cannot edit:

Other drivers logs
Intermediate logs
Driver ELD login/logout activity
Engine power-up or shut-down activities
ELD malfunction or data diagnostic events
Inactive events

In addition, with limited exception for correcting errors with a co-driver, you are not able to reduce,
reassign, reclassify, or delete any time recorded as a Drive duty status.

ELD Driver Guide Rev A
MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION

To edit your log:
1. From the ELD Activities menu of Omnitracs Drive HOS screen to access
select the Edit Log option.

2. The Log Editor screen appears.
Editable events are indicated by a
pencil icon.
Note: If an error is made when
originally entering Shipping
Information at log in, you can use
the Log Editor to correct the error.

3. To add an event, select the +Event button in the upper
right corner of the screen. The Select Event to Add screen appears.

a. Select Duty Status, Add Shipping Information, or Remark. The screen that appears will
depend on which event you selected.
b. Complete all required fields. When you have finished, select Continue to return to the Log
Editor screen. The event you added is shown in green in the graph and in the events list.
c. Select Save to save the added event. The Violation Changes screen appears to alert you
to any potential HOS violations that have occurred as a result of the change you made.
d. Select Continue to return to the Log Editor screen. The new event has been added to the
graph and the events list.
Note: If you add a Remark or Shipping Information, you are prompted to add a trailer
after you select Continue. If you are adding a remark, you can select Skip to bypass this

ELD Driver Guide Rev A
MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION

step; if you are adding shipping information, you must add and save trailer information.
4. To edit an event, select the pencil icon next to the event you need to edit. The Edit Duty Status
screen opens for that event.

a. Edit the fields as needed. When you are finished, select Continue. You return to the Log
Editor screen. The edits you made appear in green in the log.
b. Select Save to save your edits to the log.
After you add or edit events, you will need to re-certify your logs. Select the Certify tab, review the logs,
and select Certify.
Note: Drive events cannot be reduced, reclassified, reassigned, or deleted.

Reviewing Motor Carrier Edits

If the motor carrier suggests edits to your log from the Omnitracs One Host website (for example,
Unassigned Vehicle Activity or carrier initiated ELD exemptions), you must confirm or reject each edit.
Drivers are notified of suggested motor carrier edits once they have logged into Omnitracs One Drive,
associated to a vehicle and changed their status to On Duty. If edits arrive while the vehicle is in motion,
drivers will be notified as soon as the vehicle is stationary. If there are team drivers, the drivers are
notified immediately, even if the vehicle is in motion.

ELD Driver Guide Rev A
MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION

To confirm motor carrier edits:
1. Log in to Omnitracs One Drive, associate to a vehicle and
change your status to On Duty. If motor carrier edits are
present, you will receive a message telling you that the
motor carrier has suggested edits to your log and that you
must confirm or reject the edits before you can continue.

2. Select OK.
The Review
Carrier
Edits screen
appears, showing the edits suggested by the motor carrier.
3. Review each edit and select Confirm or Reject. If you
reject an edit, you will be required to include a comment
that explains the reason for rejecting the edit.
4. When you have confirmed or rejected all edits, select
Save. The changes are incorporated into your log and you
return to Omnitracs One Drive.

ELD Driver Guide Rev A
MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION

Certifying Logs

As part of the ELD Mandate, drivers are required to certify
their HOS logs at least once per 24-hour period.
1.
To certify your log, from the ELD Activities menu
of Omnitracs Drive HOS screen to access select the View
Logs option.
2.
The HOS Log screen appears.
3.
Select the Certify tab.

If there are events waiting to be certified by the driver, the
Certify tab on the HOS Log screen displays a red
notification badge showing the number of uncertified days.

Select the Certify tab. The screen
displays log events for the selected
date. If the events for the day are not
yet certified, a Not Certified notice,
indicated by a red X, appears at the top of the list.

ELD Driver Guide Rev A
MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION

Select the Certify button. The HOS Log screen appears, asking you to certify that the log entries are
true and correct for the designated 24-hour period.

Select Agree to certify your log. The Not Certified notification is replaced by a Certified notification,
indicated by a white check mark. If you are not ready to certify the log, select the Not Ready
button.

Select the left and right arrow buttons at the top of the screen to see logs for other days. If any of them
need to be certified, repeat steps 34. Once you have certified all uncertified logs, the red notification
next to the tab label disappears.
Once a log is certified, a Certification of Records event is added to the log. After you certify your logs,
new events or edits that occur within a 24-hour period must be re-certified.

ELD Driver Guide Rev A
MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION

Unassigned Vehicle Activity

If you associate to a vehicle equipped with an AMG-C within eight
days of unassigned vehicle activity being created with that same
vehicle, Omnitracs Drive must display unassigned driving segments
that have been stored on the AMG-C within those eight days. You
can view these activities when you open your HOS Log screen and
view the Unidentified tab.
Unidentified vehicle driving activity (UVA) not previous reviewed
by an authenticated driver is presented to the next authenticated
driver on Omnitracs One Drive when associating with the vehicle.
If you reject the UVA, it is sent back to the motor carrier, where it
can be assigned to another driver. When an Omnitracs One Host
user assigns UVA to a driver, it is sent to the assigned driver as a
suggested edit to their log, which they will then have to confirm or
reject.
When you receive notification of UVA:
1.

Select OK to review activity on the notification window. The
Review Unassigned Driving Events screen appears,
displaying all UVA created using the vehicle since the last
authenticated driver was associated with the vehicle.

Select Confirm or Reject for each unassigned driving event. Select the View Graph button if you want
to see how the UVA would fit into your existing log.

When you are finished, select Save to add any confirmed UVA event(s) to your log. You return to the
HOS Log screen and can see that the drive time formally associated with the confirmed UVA has now
been added to your log.

All UVAs created using the associated vehicle during the previous 8 days will be displayed on the
Unidentified tab. Activities with an Inactive Record Status have been accepted by an authenticated
driver (may not be you). Those with an Active Record Status remain unassigned. Having the information
on a separate tab makes it easier for law enforcement officials to view UVA when they are inspecting
logs.

Diagnostic and Malfunction Alerts

The ELD Mandate requires that the AMG-C record and store relevant diagnostic and malfunction events
and alert drivers when a diagnostic or malfunction event occurs. The AMG-C detects and records the
diagnostic and malfunction events for a minimum of eight days. Omnitracs One Drive includes features that
enable you to monitor diagnostics and malfunctions. The AMG-C also immediately sends a notification to
the motor carrier, viewable on the Omnitracs One Host website, that a malfunction has occurred.

ELD Driver Guide Rev A
MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION

When an ELD malfunction is detected or an ELD diagnostic fails, Omnitracs Drive displays a red X (for
malfunction) or orange exclamation point (for diagnostic) indicator on various dashboards of Omnitracs
Drive.

Depending on the nature of the Diagnostic or Malfunction event, the HOS Status values may change as
well. You can select the indicator to open the Diagnostics and Malfunction screen, which lists any
Diagnostic or Malfunction events that have been detected since login.

Paper Log Mode

Paper Log Mode (PLM) is triggered by any ELD Compliance Malfunction that is logged while the Omnitracs
One Drive is associated to a vehicle. When PLM is triggered, you immediately go into Paper Log Mode;
you are not offered the option of doing so.
When Paper Log Mode starts, you receive a message saying, There is an active ELD malfunction. You must
keep paper logs until the malfunction clears.

Select OK. When you return to the Omnitracs One Drive Dashboard, the values in the HOS Panel all read
NA.
Note: While in Paper Log Mode, you must be able to produce records of duty status for the current day
plus the seven previous days. This may require you to recreate each of the 8 days using paper logs.

ELD Driver Guide Rev A
MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION

When the malfunction that triggered the PLM has cleared, you are taken out of Paper Log Mode. You
receive a message saying, ELD malfunction has cleared. You may resume use of the ELD as your Record of
Duty Status. Select OK to return to the Omnitracs One Mobile Dashboard.
Drivers need to continue using Omnitracs Drive to record hours of service even if a malfunction is active, as
long as the malfunction does not interfere with the accurate recording of the drivers HOS data. To support
this requirement, the following malfunctions will no longer cause Omnitracs Drive to switch to Paper Log
Mode and drivers will not be prompted to keep paper records:
Power Compliance Malfunction
Position Compliance Malfunction
Data Transfer Malfunction
For Engine Sync malfunctions, Omnitracs Drive will not enter Paper Log Mode, but drivers will receive a
message advising them to review all duty status records and either continue to use the ELD if the records
are accurate or reconstruct the records if they are not accurate. The behavior of other malfunctions has not
changed.

Sending ERODS when Requested by Law Enforcement

As part of the ELD Mandate, drivers must be able to present safety officials with a copy of their records of
duty status for the current day and the past seven days upon request. Omnitracs One Drives ERODS File
Transfer functionality allows drivers to do so using either web services or email. In order to transfer an
ERODS file, the driver must be On Duty and within Bluetooth range of an associated vehicle to use this
option.
You can use the ELD Activities menu of Omnitracs Drive HOS screen to access Driver Logs and select View
Logs.

ELD Driver Guide Rev A
MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION

When you select View Logs, you will be redirected to the Drivers Daily Log screen within the compliance
application. Select the 3-stacked dot menu in the upper right corner of the HOS Log screen. The HOS
Options menu appears.
1.

From the menu, select ERODS File Transfer.

From the ERODS File Transfer screen, select the Web Services or Email field as the appropriate
transfer method specified by the enforcement officer.

When provided by the enforcement officer, enter the comment in the Enter a Comment (Optional)
field.

ELD Driver Guide Rev A
MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION

Select Send. A message stating the eRODS file is being processed appears.

When the eRODS file transfer is complete, you receive a notification that the file was either sent
successfully or that delivery failed.
6. If the transfer fails, attempt a second time.
7. If the transfer fails both attempts, request that the enforcement officer view the records of duty status
on the display and present them in inspector mode as explained on page 13 of this guide.
5.

Note: All ERODS transfers are sent to the Federal Motor Carrier Safety Administration (FMCSA). You
should never use the ERODS transfer process unless instructed to do so by a safety officer. This should not
be used as a mechanism to send ERODS to your motor carrier or yourself.

ELD Driver Guide Rev A
MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION

To add a co-driver, navigate to the Compliance application, and tap the three-line menu in the top left
corner to access the Co-Driver Login:
Follow the prompts to enter the co-driver Login ID and
Password.

If the co-driver needs to become the primary driver, first ensure both
drivers are on duty, and then tap the three-line menu in the top left
corner in the Compliance application, and select Change Drivers:

ELD Driver Guide Rev A
MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION

When either driver completes their shift, first ensure the first driver who logged into Omnitracs Drive is the
primary driver. The Primary Drivers name is always the first name at the top of the screen, and the codriver is second, shown in the red box:

Use the Change Drivers option described above to make the
original driver is Primary again.
Once this is complete, you may now log out the co-driver by
accessing the three-line menu in the top left corner and tapping CoDriver Logout. Follow the prompts to log the co-driver out.

You may then log out the primary driver by returning to Omnitracs Drive selecting Logout.

ELD Driver Guide Rev A
MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION

Adding a Trailer Using
Omnitracs Drive

If the trailer is not provided as part of the
drivers workflow information, it will need to be
entered manually so that it appears in the ELD
log header. To enter trailer numbers, select
Compliance from Omnitracs Drive fly-out menu.

Select the three-line menu from the top left corner
and tap Vehicle:

Next tap Hook Trailer and select a trailer or enter an unlisted trailer:
:

Follow the prompts to enter the trailer. You will be returned to the Compliance dashboard.
ELD Driver Guide Rev A
MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION

When you are done with the trailer, you must also drop it in the Compliance application. To do this, follow
the Hook Trailer steps above, but this time select Drop Trailer:

Entering Shipping/Manifest Information Using Omnitracs Drive

The ELD Mandate requires a Shipping ID to be entered for each trip. If a manifest, BOL or route ID is not
provided as part of the drivers workflow information, then a shipping ID must be manually entered so that
it appears in the ELD log header. To enter shipping/manifest information, select Compliance from
Omnitracs Drive fly-out menu and then select the three-line menu from the top left corner and tap HOS:

ELD Driver Guide Rev A
MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION

In the HOS Log screen, select the menu in the top right-hand corner of the screen, and select Options and
then select Enter Shipping Info:

Then select the type of shipping information you would like to enter (you may enter information for any
one, two or three of the options):

Follow the prompt to enter your Shipping ID, and then return to the Drive application.

ELD Driver Guide Rev A
MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION

Omnitracs Drive with AMG-C ELD Driver Cab Card

The driver cab card (80-JE185-1) will be kept in the vehicle and must be presented to law enforcement
upon request.

ELD Driver Guide Rev A
MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION