User manual for "Bluehorseeld"

Below you will find the vendor provided user manual for the ELD product "Bluehorseeld".

For contact information and additional devices produced by the same vendor see their page Blue Horse ELD Inc.

ELD

User Manual

USER

MANUAL

bluehorseeld.com

- _ HORSEELD

Driver Login
 Open the Bluehorse application.
e Enter the Username and Password.
e Press the Login button.

hh
HORSE ELD

USERNAME
[email protected]

g@ Remember Password
LOGIN

bluehorseeld.com

@

@

@

e@

@

@

oe

-

HORSEELD

Connect to
Vehicle
Locate the diagnostic port.
Attach the wire to the diagnostic port.
Attach other side of the wire to the device.
Press Connect signal red button on top right.
Press scan button if no device found.
Select the available device.
ELD

will connect

with App

and

signal

button

should turn green

Select Device
AVAILABLE DEVICES:

af

730-

PT30_669D

SCAN
CANCEL

~ 

=

SZ

0 lit ee

bluehorseeld.com

oo

(\
		

			

				
				© ELD.report 2025 
				 
				
Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.