User manual for "ID ELD"

MANUAL

Per FMCSA rules, this guide must be kept in the vehicle at all times.

SUPPORT
888-228-4460

[email protected]

ADDRESS
Oakbrook Terrace

17W110 22nd St #760

1

Download 

ID ELD Application

1 Search for ID ELD in the Google Play store
2 Tap INSTALL to download the app
using your email and password (PICTURE 3)
3 LogIf youintodontapplication
have a ID ELD account, please contact your eet manager.

PICTURE 3

2

4

Select your vehicle from the list (PICTURE 4).

If your vehicle number doesnt show up, please contact your eet manager.

PICTURE 4

5

Your cellular device will connect to the ID ELD plug automatically.

The status will be shown on top of the main screen.

PICTURE 5

6 The status line will appear in 3 ways:
DEVICE IS SCANNING

DEVICE IS CONNECTING DEVICE CANT CONNECT

Note: When the device is properly connected, the status line will not show.

3

Install ID ELD In Your Vehicle

1

Make sure your vehicle engine is turned o. If the engine is on, please turn it

o and turn the key to the O position before connecting ELD device.

the diagnostic port inside your vehicles cabin. The diagnostic port is

2 Locate
typically located in one of the following places:
1. Under the left side of the dashboard

2. Under the steering wheel

3. Near the drivers seat

4. Under the drivers seat.
4

1
3

2

3

Attach the ID ELD plug into the diagnostic port of
the vehicle. Twist the plug base until it locks into
place.

4

Once plugged in, the device will start syncing with the engine control module

(ECM) and ID ELD application on your cellular device. The ID ELD device has
LED lights to simply indicate its status to the driver:
BLUE LINK (WIRELESS LINK)
MALFUNCTION
NO LIGHT
BLINKING BLUE

WHAT TO DO
Turn the engine off and check the cable connection
Turn the engine off and restart the tablet call customer support
;

I
MALFUNCTION
NO LIGHT
BLINKING BLUE
BLINKING GREEN

OSiX

WHAT TO DO
Turn the engine off and reconnect the plug
Turn the engine off and reconnect the plug
Turn the engine on and restart the tablet

4

Using ID ELD On The Road
Once you have connected your mobile device to ID ELD, your driving time will be
automatically recorded. 


When your vehicle begins moving at a speed of 5 mph or more, your duty status will
automatically be set to Driving. 


At 0 mph or less, the vehicle is considered to Idle. When Idle, you can change your
duty status by tapping and selecting one of the alternative duty status (PICTURE 6).

PICTURE 6
Tap

sign (top right corner of the app) to switch to Night Mode.

Tap

sign to switch back to the Day Mode (PICTURE 7).

PICTURE 7

5

Using ID ELD On The Road

(continued)

If the vehicle remains Idle for 5 minutes, a pop-up window will appear asking if you
would like to change your duty status. If no selection is made within 60 seconds, duty
status will change automatically to On Duty (PICTURE 8).


When not driving, the main window will be in foreground (PICTURE 9).

PICTURE 8

When not driving, the main window will be in foreground (PICTURE 9).

PICTURE 9

6

Using ID ELD O The Road
Select the status: O Duty, Sleeper, On Duty (PICTURE 10).

PICTURE 10

Fill out the location eld and put remarks, such as Pre-trip inspection or Coee break
(if the location eld is left empty, it will be automatically set) (PICTURE 11) .

PICTURE 11

7

Using ID ELD Off The Road

(continued)

If you need to add corrections to your e-log, you can insert missing status by tapping 

or edit existing status by tapping
(PICTURE 12).

PICTURE 12

Choose the status you want to change and set the time frame (PICTURE 13).

PICTURE 13

8

There are two ways you can set the time frame:

1 Drag the border dots (PICTURE 14).
PICTURE 14

2 Set the time using the pop-up window (PICTURE 15).

PICTURE 15

9

Other options available from the main screen:

A Check your prole (PICTURE 16-A).
B Sign your daily electronic log-book (PICTURE 16-B).

PICTURE 16-A

PICTURE 16-B

C Make a Driver Vehicle Inspection Report (DVIR). (PICTURE 17-A, 17-B)

PICTURE 17-A

PICTURE 17-B

in & check out (Track detention time for pick up and delivery). 

D Check
(PICTURE 18-A, 18-B)

PICTURE 18-A

PICTURE 18-B

10

Ocer Inspection
Its easy to provide an ocer with your driving information.
left corner, or swipe from left side of your device
1 Tapto the right sideiconandon theselecttopInspection
Module (PICTURE 19).

PICTURE 19

2

Tap Begin Inspection and hand your device to the ocer (PICTURE 20)

or tap Send Logs to send the report through email (PICTURE 21).

PICTURE 20

PICTURE 21

11

Ocer Inspection
(Continued)
The application will generate the report for the ocer

(PICTURE 22).

Tap

on the top left corner to exit DOT inspection.

* Federal Motor Carrier Safety regulation 49 CFR 39515 does not require a driver to provide a
hard copy printout of their logs for on authorized safety ocial. However, you con email your logs
from the ID ELD App should you choose to provide the authorized safety ocial with a hard copy.

12

Settings
Choose Settings from the side menu to change sound settings or violations visibility

(PICTURE 23).

PICTURE 23

Move toggle to the right to turn on an option, or to the left to turn it o (PICTURE 24).

PICTURE 24

13

ID ELD Malfunctions
 395.22 Motor Carrier Responsibilities
A motor carrier must ensure that its drivers possess onboard a commercial motor vehicle
an ELD information packet containing the following items:
An instruction sheet for the driver describing ELD malfunction reporting requirements and recordkeeping procedures during ELD malfunctions.

The following instructions are in accordance with the
guidelines set forth in  395.34

How does the driver know if  

ID ELD is malfunctioning?
The ID ELD device has LED lights to simply indicate its status to the driver.
BLUE LINK (WIRELESS LINK)
MALFUNCTION
NO LIGHT
BLINKING BLUE

WHAT TO DO
Turn the engine off and check the cable connection
Turn the engine off and restart the tablet call customer support
;

I
MALF

Read the full extracted text