User manual for "UzbPrime ELD"

UzbPrime
ELD

Users Manual
[email protected]
(223) 666-4999
Please keep this Manual in your vehicle at all times!

Application Guide
Login
Log in to the application using your username and password. If
you dont have a UzbPrime ELD account, please contact your eet
manager or your companys safety personnel.

Select your vehicle
Select your vehicle by matching the Vehicle number or
VIN number. You can search for your vehicle by the
Vehicle number or VIN number. If you are not presented
with the Select Vehicle screen, your fleet manager has
pre-assigned you to a vehicle. You can assign yourself to
a different vehicle by going to Menu and selecting
Change Vehicle.

page 2

Application Guide
Login
Connect to your ELD device by choosing your ELD device. If your connection fails, you will be prompted with instructions to troubleshoot.
Once you are connected to the ELD device, the app will visually indicate it. If the connection is successful, the app will forward you to the
dashboard page and you can see your ELD device status in the green icon on the top right corner.

page 3

Using UzbPrime ELD
Using UzbPrime ELD on the road
After establishing a connection with your ELD device, you can start your work by setting your duty status. When your vehicle starts moving
faster than 5mph, your duty status will automatically change to "Driving" and your screen will change to the driving mode. During driving
mode, you will not be able to change your duty status until you stop your vehicle at a safe location.

page 4

Using UzbPrime ELD
Accessing previous day logs & certifying
You can access the previous 14 days of your logs by clicking the Logs shortcut on the dashboard page or going to Menu then Logs. Each
log date will have shortcut information about if that particular log date has been certied or if Trailer & Shipping Documents information has
been lled in. You can certify each log date by clicking on the particular log date and clicking Certify located at the bottom of the screen. You
can bulk-certify uncertied logs from the dashboard page. Click on the Certify shortcut at the bottom of the screen. Check the checkbox for
the uncertied days individually or click the All checkbox to check all uncertied days. When done, click on
Certify to certify all uncertied logs at once.

page 5

Roadside Inspection
Roadside Inspection (Follow the given guidelines to show your records to the ocer)
Click the Menu icon on the top left corner and select DOT Inspection. Tap Being Inspection and show your
electronic logbooks 8-day summary to the ocer.

page 6

Transfer ELD records
Transfer ELD records (Follow the given guidelines to send your records to DOT)
Click the Menu icon on the top left corner and select DOT Inspection. Tap Transfer Logs to send your ELD records to DOT. In the pop-up
window, write your comment and click the Transfer Logs button.

page 7

ELD Malfunctions
395.22 Motor carrier Responsibilities
A motor carrier must ensure that its drivers possess onboard a commercial motor vehicle and ELD information packet containing the following
items: An instruction sheet for the driver describing ELD malfunction reporting requirements and recordkeeping procedures during ELD
malfunctions.

The following instructions are in accordance with the guidelines set forth in 395-34
Our ELD will monitor and report malfunction data based on section 4.6 ELDs Self-Monitoring of Required Functions, table 4:
P  Power compliance malfunction,
E  Engine synchronization compliance malfunction,
T  Timing compliance malfunction,
L  Positioning compliance malfunction,
R  Data recording compliance malfunction,
S  Data transfer compliance malfunction,
O  Other ELD detected malfunction.

page 8